Installation
WARNING
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed.
•Read MSDS’s to know the specific hazards of the fluids you are using.
•Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted with air.
•Store hazardous fluid in approved containers, and dispose of it according to appli- cable guidelines.
•Always wear impervious gloves when spraying or cleaning equipment.
BURN HAZARD
Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe burns:
•Do not touch hot fluid or equipment.
•Wait until equipment/fluid has cooled completely.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in the operating area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes but is not limited to:
•Clothing and respirator as recommended by the fluid and solvent manufacturer
•Protective eyewear, gloves, and hearing protection
Installation
The Typical Installations shown in FIG. 3 and FIG. 4 are only guides for selecting and install- ing system components. Contact your Graco distributor for assistance in planning a system to suit your needs.
Tighten Fasteners Before Setup
Before using the pump for the first time, check and retorque all external fasteners. Follow Torque Instructions, page 16.
6 | 312877C |