Graco 312877C important safety instructions Important Safety Instructions, 1050A Aluminum

Page 1

Operation

Husky® 1050 Air-Operated

Diaphragm Pump	312877C
	ENG

1-inch pump with modular air valve for fluid transfer applications See page 3 for model information, including approvals.

125 psi (0.86 MPa, 8.6 bar) Maximum Fluid Working Pressure 125 psi (0.86 MPa, 8.6 bar) Maximum Air Input Pressure

Important Safety Instructions

Read all warnings and instructions in this manual. Save these instructions.

1050P Polypropylene

1050C Conductive

Polypropylene

	with End
1050A Aluminum	Flange

ti13844a

ti13946a	with Center
	with Center
	Flange

1050S Stainless Steel

ti14342a

ti13843a

0359

Image 1

Contents 1050P Polypropylene 1050C Conductive Important Safety Instructions1050A Aluminum 1050S Stainless SteelRelated Manuals ContentsAtex Certifications Pump MatrixFire and Explosion Hazard Plastic Parts Cleaning Solvent Hazard Tighten Fasteners Before Setup InstallationGrounding MountingFluid supply container Follow local code Air Line Reed SwitchAir Exhaust Ventilation Fluid Outlet Line Fluid Supply LineKey Typical bung-mount installation aluminum, 1050A, pump shown C BA Aluminum 1050A Fluid Inlet and Outlet PortsStainless Steel 1050S Bolt tightening sequenceFluid pressure relief kit Aluminum pumps only, 1050A models Fluid Pressure Relief ValveOperation Pressure Relief Procedure Starting and Adjusting the PumpFlush the Pump Before First Use Maintenance Torque sequence Torque Instructions312877C Aluminum 1050A Dimensions and MountingNptf air inlet Polypropylene 1050P and Conductive Polypropylene 1050CIn. ANSI/DIN flange Stainless Steel 1050S Fluid Pressure Performance ChartsAir Consumption Technical Data Fluid Temperature Range Fluid Temperature RangeAluminum or Stainless Steel PumpsGraco Information Graco Standard Husky Pump Warranty