Goodman Mfg SS-CPC90-150 dimensions Standard Belt-Drive Down Shot, Standard Belt-Drive Horizontal

																Product Specifications
Airflow Data — 10 Tons
							Standard Belt-Drive — Down Shot
ESP										Turns Open
		0				1			2			3			4			5
(“ W.C.)
	CFM		RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP
0.2								4632	781	1.76	4203	742	1.41	3927	691	1.17	3510	658	0.9
0.4					4488	825	1.85	4183	783	1.54	3733	748	1.23	3512	693	1
0.6	4442		880	2.02	4066	830	1.63	3717	786	1.31
0.8	4001		885	1.77	3622	835	1.41
1	3603		890	1.55
1.2
							High-Static Belt-Drive — Down Shot
ESP										Turns Open
		0				1			2			3			4			5
(“ W.C.)
	CFM		RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP
0.8														4435	940	2.22	4078	886	1.82
1											4462	997	2.47	4103	945	2.05	3539	892	1.52
1.2								4513	1054	2.75	4127	1003	2.26	3568	950	1.71
1.4								4126	1064	2.52	3597	1008	1.92
1.6					4438	1116	2.97	3759	1069	2.25
1.8					3956	1124	2.55
2	4050		1179	3.05	3473	1132	2.32
							Standard Belt-Drive — Horizontal
ESP										Turns Open
		0				1			2			3			4			5
(“ W.C.)
	CFM		RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP
0.2											4562	736	1.58	4253	691	1.29	3893	642	1
0.4								4497	780	1.7	4200	736	1.41	3735	691	1.06	3322	648	0.83
0.6					4467	824	1.81	4221	784	1.55	3689	741	1.18
0.8	4564		873	2.06	4170	830	1.68	3677	785	1.29
1	4129		875	1.81	3498	835	1.34
1.2	3558		879	1.49
							High-Static Belt-Drive — Horizontal
ESP										Turns Open
		0				1			2			3			4			5
(“ W.C.)
	CFM		RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP	CFM	RPM	BHP
0.8																	4602	884	2.13
1														4749	940	2.44	4180	885	1.89
1.2			DO NOT											4251	945	2.12	3642	896	1.58
1.4											4443	1001	2.5	3744	951	1.8
		OPERATE
1.6								4587	1056	2.82	3971	1006	2.17
1.8					4760	1105	3.23	4071	1061	2.43	3342	1012	1.86
2					4364	1114	2.91	3579	1067	2.05

Notes :

Assume dry coil with filter in place; CFM correction for wet coil = 3%

Any adjustment made to the blower should not cause the motor to draw more than the motor rated RLA. Applications that exceed the above could require a larger motor. Minimum rated SCFM is 350 per ton.

SS-CPC90-150 www.goodmanmfg.com 9