910MHz. This will also be done for re- synchronization.
SETTING THE TIME
1.Press and hold the “SET/CH” button for 5 second,
“12h” will appear in the
TIME LCD.
2.Press and release the “MIN/MAX” button to select either 12h time (am/pm) or 24h time
3.Press and release the “SET/CH” button 2 times, the hour will flash in the upper left corner.
4.Press and release the “MIN/MAX” button to set the hours
5.Press and release the “SET/CH” button to move to the minute setting
6.Press and release the “MIN/MAX” button to set the minutes.
7.Press and release the “SET/CH” button to activate the clock.
Note: When in 12h mode, there is only a “PM” display, which appears under “TIME.” If there is no display here it is AM. Make sure you set the time accordingly.
12