La Crosse Technology Mounting the WS-7394U-IT Wireless Weather Station, Using the Table Stand

Page 19

a.With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat.

b.Remove the protective strip from one side of the tape.

c.Adhere the tape to the designated area on the back of the mounting bracket.

d.Remove the protective strip from the other side of the tape.

e.Position the remote temperature sensor in the desired location, ensuring that the Wireless Weather Station

can receive the signal.

Note: Mounting with adhesive tape is not recommended as a permanent mounting solution. Only use the adhesive tape during set-up process.

B.Mounting the WS-7394U-IT Wireless Weather Station

The Wireless Weather Station can be mounted in two ways:

•with the table stand

•on the wall with the use of a wall hanging screw (not included)

1.USING THE TABLE STAND

The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor weather station in an appropriate location.

2.WALL MOUNTING

a.Remove the table-stand. To do this, pull down on the stand from the rear and rotate forward.

b.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

c.Place the indoor weather station onto the screw using the hanging hole on the backside.

d.Gently pull the indoor weather station down to lock the screw into place.

Maintenance and Care Instructions

A.Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units.

B.Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.

C.Do not submerge in water.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents WS-7394U-IT Wireless 915 MHz Wireless Weather Station Table of Contents This product offers Inventory of ContentsWeather Station Quick SET-UP GuideWireless Weather Station Remote Temperature SensorDetailed SET-UP Guide Wwvb Reception II. Start Up Sequence Initial StartIII. Explanation of LCD Information IV. Function Key Layout Program ModeOverview of programming mode sequence LCD Contrast SettingDST ON/OFF Setting Time Zone SettingRadio-Controlled Time ON/OFF Setting Setting The Hour Manually 12/24-hour Time ModeSetting The Date Manually Setting The Minutes ManuallySetting The Year Manually Setting The Month ManuallyRelative Pressure Setting Temperature Measuring Units Selection F or CAir Pressure Measuring Units Selection inHg/hPa Manual Setting is NOW Completed Forecast Sensitivity SettingOutdoor Minimum and Maximum Temperature Features and OperationsViewing and Operating with Multiple Remote Sensors Multiple Remote Temperature SensorsWeather Forecast Icon and Pressure Trend Indicators Comfort Indicator for Indoor Temperature and HumidityWeather Icons Weather Tendency Arrows Air Pressure History Bar ChartBarometric Air Pressure Reading Mounting with Adhesive Tape Mounting the Remote Temperature SensorVII. Mounting Mounting with ScrewsWall Mounting Mounting the WS-7394U-IT Wireless Weather StationUsing the Table Stand Maintenance and Care InstructionsSpecifications TroubleshootingProblem SolutionAir pressure Sensor reading update within sensorPower supply Relative humidity rangePage FCC ID OMOTX29U sensor RF Exposure mobile WS-7013U-IT Table of Contents Inventory of Contents Quick Setup Do not Press ANY Buttons for Minutes Page Page Detailed Setup Guide Remote Temperature Sensor Remove the mounting Page Page Setting the Time Features Page Page Page To wall mount MountingTroubleshooting Solution Maintenance and Care Measuring Temperatures SpecificationsDimensions H x W x D Warranty InformationPage Page Page Fax Mail Support@lacrossetechnology.com Warranty work Web FCC ID OMOTX29U sensor RF Exposure mobile
Top Page Image Contents