Eton ego4000 operation manual Intro Scan, Random Play, Programmed Play

O P E R A T I O N G U I D E

INTRO SCAN

Sequentially plays the first 10 seconds of each track enabling selection of the desired track.

Please follow steps below to initiate Intro Scan:

1)Stop playing by pressing the ■ button (if necessary).

2)Repeatedly press Mode/Dir button until “INTRO” indicator appears in the LCD display.

3) Press	button. Intro playing starts at once from the first track on.
When the desired track is found, press		button once more, intro play is
cancelled, and it plays the track normally.

RANDOM PLAY

You can have the player play at random by following steps below:

1)Stop playing by pressing the ■ button (if necessary).

2)Repeatedly press Mode/Dir button until “RANDOM” indicator appears on the LCD display.

3) Press button. Random playing starts at once.

To cancel random play, press the ■ button.

PROGRAMMED PLAY

You can program up to 100 tracks in any order you choose to play, and the same track can be programmed for more than once.

To Program CD or MP3 playing sequence, you must first stop playing by pressing ■ button, then follow steps below to complete programming.

CD
1.	Press EQ/Prog button, “PROG” indicator is shown on LCD display.
2.	Press	or	button repeatedly to find out the track to be
	programmed.
3.	Press EQ/Prog button again to save.

16