Audio menu, Display menu, Others menu | Panasonic SC-VK680 specs

NTSC DISC OUT	NTSC: Output signals from NTSC discs remains as NTSC.
Choose PAL60 or NTSC output when	PAL60: NTSC discs can be viewed on PAL television.
playing NTSC discs.	( For Southeast Asia and Thailand “NTSC” is the factory preset)


STILL MODE	AUTO
Specify the type of picture shown when	FIELD5: The picture is not blurred, but picture quality is lower.
paused.	FRAME5: Overall quality is high, but the picture may appear blurred.
VIDEO OUT (I/P)	INTERLACE PROGRESSIVE
Select “PROGRESSIVE” only if	When you select “PROGRESSIVE”, a message screen will appear.
connecting to a progressive output	For progressive output, press [e] and then press [OK].
compatible television.	Press [ , RETURN] to cancel.

“AUDIO” menu

SETTING STATE	Display the current setting of the items below
PCM OUTPUT	UP TO 48kHz: When connected to equipment compatible with 44.1 or 48 kHz
Check the digital input limitations of the	UP TO 96kHz: When connected to equipment compatible with 88.2 or 96 kHz
equipment you connect using COAXIAL	• Signals from copy-protected discs are converted to 48 or 44.1 kHz.
terminal and select the maximum	• Some equipment cannot handle sampling frequencies of 88.2 kHz, even if they can
sampling frequency of PCM digital output.	handle 96 kHz. Read your equipment’s operating instructions for details.
DOLBY DIGITAL	BITSTREAM
With COAXIAL connection ( page 10)	PCM	Select “BITSTREAM” when the equipment can decode the bitstream
DTS	BITSTREAM	(digital form of multi-channel data). Otherwise, select “PCM”. (If the
With COAXIAL connection ( page 10)	PCM	bitstream is output to the equipment without a decoder, high levels of
MPEG 6	BITSTREAM	noise can be output and may damage your speakers and hearing.)
With COAXIAL connection ( page 10)	PCM
DYNAMIC RANGE	ON: Adjusts for clarity even when the volume is low through compressing the range
	of the lowest sound level and the highest sound level. Convenient for late night
	viewing. (Only works with Dolby Digital.)
	OFF

SETTING STATE	Display the current setting of the items below

LANGUAGE	6	ENGLISH	FRANÇAIS	DEUTSCH	ITALIANO
Choose the language for the on-screen		ESPAÑOL	POLSKI	SVENSKA	NEDERLANDS
messages.
messages.	7	ENGLISH	繁體中文

SETTING STATE		Display the current setting of the items below
REGISTRATION DivX		SHOW CODE: You need this registration code to purchase and play DivX Video-on-
Displays the unit’s registration code.		Demand (VOD) content ( page 7, ABOUT DIVX VIDEO-ON-DEMAND).
JPEG TIME		To change the slideshow timing
		1 SEC to 15 SEC	15 SEC to 60 SEC	60 SEC to 180 SEC
		(in 1 unit)	(in 5 unit)	(in 30 unit)
		• “3 SEC” is the factory preset.
EASY SETUP		SET: Display the EASY SETUP settings
DVD-VR/DATA		DVD-VR:To play the video programs on DVD-RAM or DVD-R/RW.
Select to play only DVD-VR or DATA		DATA: To play the data files on DVD-RAM or DVD-R/RW.
format.
SCREEN DIMMER		OFF
This is to prevent burn mark on the		WAIT 5 MIN: If there is no operation for 5 minutes, the pictures turns grey. The
television screen.		television screen would resume when you perform some operations. (This does not
		work during video playback.)
DEFAULTS		RESET
This returns all values in the Setup menus		The password screen is shown if “RATINGS” ( page 22) is set. Please enter the
to the default settings.		same password and press [OK], then turn the unit off and on again.
5 Refer to “Frame still and field still” ( page 38, Glossary).
6	For Australia and N.Z
7	For Southeast Asia and Thailand

RQTX0282