Panasonic SC-VK680 manual Cassette tapes Play and Recording, Preparation, Aux Usb

Cassette tapes — Play and Recording (continued)

Recording

Use normal position tapes.

High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly.

Preparation

1 Wind up the leader tape so recording can begin immediately. 2 Press [7, TAPE] and then [g].

1Press the deck [;, OPEN] on the main unit and insert the cassette to be recorded.

The tape direction is automatically set to “F q”.

2Press [PLAY MODE] to select the reverse mode.

: One side only records.

: Both sides record (forward  reverse)

While recording, if a track is cut off in the middle at the end of the front side, it is re-recorded from the beginning on the reverse side. At the end of the reverse side, recording stops and the current track will be interrupted.

•“” automatically changes to “ ” when you start recording.

3Select the source to be recorded.

Stop recording
If the tape finishes before the disc
The disc continues playing. Press [g] (main unit: [g, –DEMO])		ENGLISH
to stop it.
Erasing recordings
1 Press [7, TAPE] and then [g].
2 Press and hold [*, REC] followed by [TAPE]
(main unit: [* REC, TAPE]) to start recording.
Erasure prevention		Recording
Use a screwdriver or similar object to break out the tab.
Side A		and
Tab for side B	Tab for side A	— Play
To record on the tape again, cover the hole with adhesive tape.		Cassettetapes

Radio

Disc(s)

Music Port

AUX

USB

Tune to the required station. ( The radio, page 24)

Insert the disc(s) you want to record.  Press [DVD/CD q] and then [g]

•Recording specific disc(s) or tracks ( Program play, page 18)

Using the Music Port, page 31

Using an external unit, page 32

Connect the USB mass storage device ( USB — Play and Recording, page 26)

Press [q, USB] and then [g]

•Recording specific tracks ( Program play, page 18)

Adhesive tape

Note

•Multi-channel sources are automatically down-mixed to 2 channels during recording.

•The volume, sound field and quality have no effects on recording.

•You cannot open the deck while recording.

•You cannot fast-forward or rewind the deck while recording.

4Press and hold [*, REC] followed by [TAPE] (main unit: [* REC, TAPE]) to start recording.

RQTX0282

25