Panasonic SC-VK680 Other television connection, Connecting a television with a Video in terminal

Other television connection

Connecting a television with a VIDEO IN terminal

	VIDEO IN
Rear panel of this unit	Television
	(not included)

VIDEO OUT terminal

Do not connect the unit through a video cassette recorder, because the picture may not be displayed correctly due to copy guard protection.

Turn the television off before connecting, and refer to the television’s operating instructions.

Connecting a television with COMPONENT VIDEO IN terminals

Antenna connections

AM loop antenna

White

Black

Red

Click!

•Stand the antenna up on its base.

•Place the antenna where reception is best.

Simple setup ENGLISH

	COMPONENT
	VIDEO IN
	Y
	PB
	PR
Rear panel of this unit	Television

(not included)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or
progressive output. Connection using these terminals	 FM outdoor antenna
outputs the colour difference signals (PB/PR) and
luminance signal (Y) separately in order to achieve
high fidelity in reproducing colours. The description of
the component video input terminals depends on the
television or monitor (e.g. Y/PB/PR,Y/B- Y/R-Y, Y/CB/CR).
Connect to terminals of the same colour.

FM outdoor antenna (not included)

75 Ω coaxial cable (not included)

To enjoy progressive video

1.Connect to a progressive output compatible television.

2.Set “VIDEO OUT (I/P)” to “PROGRESSIVE”, then follow the instructions on the menu screen

( page 23, “VIDEO” menu).

Optional antenna connections

AM outdoor antenna

AM outdoor antenna (not included)

5 to

12 m

Use outdoor antenna if radio reception is poor.

Note

•Disconnect the outdoor antenna when the unit is not in use.

•Do not use the outdoor antenna during a lightning storm.

Connect the AM loop antenna

•Run a piece of vinyl wire horizontally across a window or other convenient location.

•Leave the loop antenna connected.

RQTX0282

11