Panasonic SC-VK680 manual Operating a Panasonic television, Using other equipment English

Operating a Panasonic television

Aim the remote control at the television for the following

Turning the television on/off

Switching the television’s video input mode

Adjusting the volume

Note

Some models cannot be operated by this remote control.

Changing the main unit and remote control mode

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1While pressing and holding [EXT-IN] on the main unit Press and hold [2] on the remote control until “REMOTE 2” appears on the main unit display.

2Press and hold [OK] and [2] on the remote control for at least 2 seconds.

The main unit and remote control are now set to operate in “REMOTE 2” mode.

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both steps. (“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.

If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [OK] and [1] on the remote control for at least 2 seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [OK] and [2] on the remote control for at least 2 seconds.

Note

You can still operate a television using the remote control ( left) even after switching the mode.

Using other equipment ENGLISH

RQTX0282

33