Simple setup
ENGLISH
Television, antenna and AC mains lead connections
Connect the AC mains lead after all other connections are complete.
Conserving power
The unit consumes power (approx. 0.4 W) even when it is turned off with [^] (main unit: [8]). To save power when the unit is not to be used for a long time, unplug it from the household AC power socket. You will need to reset some memory items after plugging in the unit.
Simple setup
Speaker connections
Connect the speakers to the main unit with the terminals of the same colour.
Speaker | Terminal/connector colour |
|
|
Front speaker (L) | White |
|
|
Front speaker (R) | White |
|
|
Subwoofer | Purple |
|
|
FM indoor antenna
Tape the antenna where reception is best.
Adhesive tape
Please refer to “Using an external unit” on page 32 for more information on AUX connection.
Insert fully
For Southeast Asia and Thailand
Before connecting the AC mains lead, set the voltage.
Voltage Selector
Use a
AC mains lead
To household mains socket
e.g. Front speaker (L)
Insertion of Connector
Even when the connector is perfectly inserted, depending on the type of inlet used, the front part of the connector may jut out as shown in the drawing. However there is no problem using the unit.
Connector | Appliance inlet |
Approx. 3.5 mm
Please refer to “Home Theater— Enjoying more powerful sound” on page 32 for more information on COAXIAL connection.
RQTX0282
Note
•The included AC mains lead is for use with this unit only. Do not use it with other equipment.
•Do not use an AC mains lead from other equipment.
10