EMC CX300, CX500, CX700 manual For Windows, On the laptop, select My Computer Dial-up Networking

Page 14

Initializing the Storage System

3.Depending on your operating system, do one of the following:

For Windows 2000

a.On the laptop, select Start > Settings > Network and Dial up Connections. Select the connection name that you assigned when you set up dial-up networking.

b.In the Connect dialog box, log in as user clariion with password clariion!.

c.Click Connect and click OK on the Connection Complete dialog box.

For Windows NT 4.0

a.On the laptop, select My Computer > Dial-up Networking.

Select the connection name that you assigned when you set up dial-up networking.

b.Select the phonebook entry you created when you set up the laptop in the previous section.

c.Click Dial.

d.In the Connect to dialog box, log in as user clariion with password clariion!. Ignore the Domain field.

e.Click OK.

4.Open a supported browser window, and enter the following URL:

192.168.1.1/setup

The Storage Processor Networking Configuration setup screen opens, similar to Figure 2.

14

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

Image 14

Contents Initialization Guide EMC CLARiiON CX300, CX500, and CX700 Storage SystemsInitialization Overview HostRequirements for Initial Setup Service Laptop Requirements Setting Up the Service Laptop Physical ModemSetting Up the Dial-Up PPP Support Windows 2000 Environment Select Dont Detect my Modem I will select it from a listClick Connect directly to another computer, then click Next Setting Up Dial-Up Networking Windows 2000 EnvironmentNetwork Connection Wizard opens Click PropertiesClick the Networking tab Start Settings Control Panel Modems Highlight Dialup Networking S... and click PropertiesSet the Initial speed bps to Setting Up Dial-Up Networking Windows NT 4.0 EnvironmentClick Configure Select the Server assigned IP address option Set Accept any authentication including clear text to onClear the check box Use another port if busy Initializing the Storage System SP a SP BTurn the service laptop on Initialization StepsFor Windows On the laptop, select My Computer Dial-up NetworkingStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure Confirm SP B SP Properties dialog box opens SP B PropertiesSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Setting Battery Test Time Changing the Default Battery Test TimeInstalling Optional Navisphere 6.X Software Connecting the Service Laptop to the SP LAN PortInstalling Software Options MirrorViewUI SnapViewUI SANCopyUI AnalyzerUIStorage System Properties dialog box opens Setting Initial Security Parameters 10.42.12.1002162/setupUsing the Serial Cable Via the Serial Port Alternate Method 192.168.1.1/setupMaking Management and Switch or Host Connections LANConnecting a Fibre-Optic Switch or Fibre Channel Host Connecting the Fibre-optic Switch/Host Cables CX700 ShownConfiguring Your Host Server and Storage System Trademark Information