EMC manual EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

Page 27

Initializing the Storage System

32.A confirmation screen opens, asking you to verify that you really want to restart the Management Server. Select Yes and click Submit. The following message is displayed:

The Management server has been stopped and will restart automatically. Please wait a moment before reconnecting.

33.Wait about 30 seconds, then return to the setup screen by entering the URL 192.168.1.1/setup. If the Management Server has successfully restarted, the system returns you to the setup screen. If it has not restarted, you will receive another Page Cannot Be Displayed message. Refresh the screen (press F5) until the setup screen opens.

34.Once the Management Server has restarted, you can close the browser.

35.Repeat steps 16 through 27, setting the time, date, and port speed for SP A.

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

27

Image 27

Contents EMC CLARiiON CX300, CX500, and CX700 Storage Systems Initialization GuideHost Initialization OverviewRequirements for Initial Setup Service Laptop Requirements Physical Modem Setting Up the Service LaptopSelect Dont Detect my Modem I will select it from a list Setting Up the Dial-Up PPP Support Windows 2000 EnvironmentClick Properties Setting Up Dial-Up Networking Windows 2000 EnvironmentNetwork Connection Wizard opens Click Connect directly to another computer, then click NextClick the Networking tab Highlight Dialup Networking S... and click Properties Start Settings Control Panel ModemsSetting Up Dial-Up Networking Windows NT 4.0 Environment Click ConfigureSet the Initial speed bps to Set Accept any authentication including clear text to on Clear the check box Use another port if busySelect the Server assigned IP address option SP a SP B Initializing the Storage SystemInitialization Steps Turn the service laptop onOn the laptop, select My Computer Dial-up Networking For WindowsStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure SP B Properties Confirm SP B SP Properties dialog box opensSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Changing the Default Battery Test Time Setting Battery Test TimeConnecting the Service Laptop to the SP LAN Port Installing Optional Navisphere 6.X SoftwareMirrorViewUI SnapViewUI SANCopyUI AnalyzerUI Installing Software OptionsStorage System Properties dialog box opens 10.42.12.1002162/setup Setting Initial Security Parameters192.168.1.1/setup Using the Serial Cable Via the Serial Port Alternate MethodLAN Making Management and Switch or Host ConnectionsConnecting the Fibre-optic Switch/Host Cables CX700 Shown Connecting a Fibre-Optic Switch or Fibre Channel HostTrademark Information Configuring Your Host Server and Storage System