EMC CX300, CX500, CX700 manual Installing Optional Navisphere 6.X Software

Page 29

Installing Optional Navisphere 6.X Software

Installing Optional Navisphere 6.X Software

You may need to add the following software:

Navisphere Manager

Access Logix, SnapView, MirrorView, SAN Copy, or Analyzer options

To add the software, you will need to connect the laptop directly to the SP LAN port. Use the 10BaseT crossover cable that shipped with your system.

Connecting the Service Laptop to the SP LAN Port

Follow steps 1-4 to create a dedicated LAN connection between the service laptop and the storage system.

1.If necessary, connect an RJ45 adapter to the NIC card on the laptop.

2.Connect the crossover cable from the service laptop to the LAN port on SP A or SP B. Figure 11 shows this connection on a CX700 system.

LAN Cable

NIC Card

EMC229

Figure 11 Connecting the Crossover Cable (CX700 Shown)

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

29

Image 29
Contents EMC CLARiiON CX300, CX500, and CX700 Storage Systems Initialization GuideHost Initialization OverviewRequirements for Initial Setup Service Laptop Requirements Physical Modem Setting Up the Service LaptopSelect Dont Detect my Modem I will select it from a list Setting Up the Dial-Up PPP Support Windows 2000 EnvironmentNetwork Connection Wizard opens Setting Up Dial-Up Networking Windows 2000 EnvironmentClick Connect directly to another computer, then click Next Click PropertiesClick the Networking tab Highlight Dialup Networking S... and click Properties Start Settings Control Panel ModemsSet the Initial speed bps to Setting Up Dial-Up Networking Windows NT 4.0 EnvironmentClick Configure Select the Server assigned IP address option Set Accept any authentication including clear text to onClear the check box Use another port if busy SP a SP B Initializing the Storage SystemInitialization Steps Turn the service laptop onOn the laptop, select My Computer Dial-up Networking For WindowsStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure SP B Properties Confirm SP B SP Properties dialog box opensSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Changing the Default Battery Test Time Setting Battery Test TimeConnecting the Service Laptop to the SP LAN Port Installing Optional Navisphere 6.X SoftwareMirrorViewUI SnapViewUI SANCopyUI AnalyzerUI Installing Software OptionsStorage System Properties dialog box opens 10.42.12.1002162/setup Setting Initial Security Parameters192.168.1.1/setup Using the Serial Cable Via the Serial Port Alternate MethodLAN Making Management and Switch or Host ConnectionsConnecting the Fibre-optic Switch/Host Cables CX700 Shown Connecting a Fibre-Optic Switch or Fibre Channel HostTrademark Information Configuring Your Host Server and Storage System