EMC CX300, CX500, CX700 manual Confirm SP B SP Properties dialog box opens, SP B Properties

Page 23

Initializing the Storage System

Figure 7 SP B Properties

20.Click the General tab.

21.In the Date and Time field, set the date and time for SP B by selecting the date, year, hour, or minute and using the arrows to scroll up and down.

22.Click Apply.

A Confirm SP B: SP Properties dialog box opens.

23.Verify the date and time and click Yes, then OK on the success screen.

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

23

Image 23

Contents EMC CLARiiON CX300, CX500, and CX700 Storage Systems Initialization GuideHost Initialization OverviewRequirements for Initial Setup Service Laptop Requirements Physical Modem Setting Up the Service LaptopSelect Dont Detect my Modem I will select it from a list Setting Up the Dial-Up PPP Support Windows 2000 EnvironmentClick Properties Setting Up Dial-Up Networking Windows 2000 EnvironmentNetwork Connection Wizard opens Click Connect directly to another computer, then click NextClick the Networking tab Highlight Dialup Networking S... and click Properties Start Settings Control Panel ModemsSet the Initial speed bps to Setting Up Dial-Up Networking Windows NT 4.0 EnvironmentClick Configure Select the Server assigned IP address option Set Accept any authentication including clear text to onClear the check box Use another port if busy SP a SP B Initializing the Storage SystemInitialization Steps Turn the service laptop onOn the laptop, select My Computer Dial-up Networking For WindowsStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure SP B Properties Confirm SP B SP Properties dialog box opensSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Changing the Default Battery Test Time Setting Battery Test TimeConnecting the Service Laptop to the SP LAN Port Installing Optional Navisphere 6.X SoftwareMirrorViewUI SnapViewUI SANCopyUI AnalyzerUI Installing Software OptionsStorage System Properties dialog box opens 10.42.12.1002162/setup Setting Initial Security Parameters192.168.1.1/setup Using the Serial Cable Via the Serial Port Alternate MethodLAN Making Management and Switch or Host ConnectionsConnecting the Fibre-optic Switch/Host Cables CX700 Shown Connecting a Fibre-Optic Switch or Fibre Channel HostTrademark Information Configuring Your Host Server and Storage System