EMC CX500, CX700, CX300 Configuring Your Host Server and Storage System, Trademark Information

Page 36

Configuring Your Host Server and Storage System

4.Connect the other end of the Port 1-3 cables as follows:

•In a system without MirrorView — to an HBA port (direct-attach configurations) or switch port (SAN configurations)

•In a system with MirrorView — Port 1 (CX500) or Port 3 (CX700) to a storage processor (SP) host port on the remote storage system, or a Fibre Channel switch port.

Configuring Your Host Server and Storage System

You are now ready to configure your host server and storage system. Refer to the appropriate checklist for your system in the EMC Installation Roadmap for CX-Series and FC-Series Storage Systems (P/N 069001166).

The Installation Roadmap and the most current versions of CX-Series documentation are available on the EMC Powerlink website, http://powerlink.emc.com. Once logged in to Powerlink, select Support > Document Library for lists and .pdf versions of relevant manuals, notes, and articles.

Copyright © 2003 EMC Corporation. All Rights Reserved.

EMC believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Use, copying, and distribution of any EMC software described in this publication requires an applicable software license.

Trademark Information

EMC2, EMC, CLARiiON, Navisphere, and PowerPath are registered trademarks and Access Logix, EMC ControlCenter, FLARE, MirrorView, SAN Copy, and SnapView and are trademarks of EMC Corporation.

All other trademarks mentioned herein are the property of their respective owners.

36

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

Page 35 Page 36
Image 36
Page 35 Page 36
Contents Initialization Guide EMC CLARiiON CX300, CX500, and CX700 Storage SystemsInitialization Overview HostRequirements for Initial Setup Service Laptop Requirements Setting Up the Service Laptop Physical ModemSetting Up the Dial-Up PPP Support Windows 2000 Environment Select Dont Detect my Modem I will select it from a listSetting Up Dial-Up Networking Windows 2000 Environment Network Connection Wizard opensClick Connect directly to another computer, then click Next Click PropertiesClick the Networking tab Start Settings Control Panel Modems Highlight Dialup Networking S... and click PropertiesSetting Up Dial-Up Networking Windows NT 4.0 Environment Click ConfigureSet the Initial speed bps to Set Accept any authentication including clear text to on Clear the check box Use another port if busySelect the Server assigned IP address option Initializing the Storage System SP a SP BTurn the service laptop on Initialization StepsFor Windows On the laptop, select My Computer Dial-up NetworkingStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure Confirm SP B SP Properties dialog box opens SP B PropertiesSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Setting Battery Test Time Changing the Default Battery Test TimeInstalling Optional Navisphere 6.X Software Connecting the Service Laptop to the SP LAN PortInstalling Software Options MirrorViewUI SnapViewUI SANCopyUI AnalyzerUIStorage System Properties dialog box opens Setting Initial Security Parameters 10.42.12.1002162/setupUsing the Serial Cable Via the Serial Port Alternate Method 192.168.1.1/setupMaking Management and Switch or Host Connections LANConnecting a Fibre-Optic Switch or Fibre Channel Host Connecting the Fibre-optic Switch/Host Cables CX700 ShownConfiguring Your Host Server and Storage System Trademark Information
Top Page Image Contents