EMC Installing Navisphere Software for CLARiiON Storage Systems
Page 33

Installing Optional Navisphere 6.X Software

Using the Serial Cable Via the Serial Port (Alternate Method)

To set initial security parameters while connected to the SP via serial connection:

1.Open your web browser on the service laptop.

2.In the URL window, enter the following IP address:

192.168.1.1/setup

3.In the Navisphere 6.X Setup Pages that appear, set Security and/or Privileged Users as needed.

Security is automatically set for the other SP.

EMC CLARiiON CX300, CX500, and CX700 Initialization Guide

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents EMC CLARiiON CX300, CX500, and CX700 Storage Systems Initialization GuideHost Initialization OverviewRequirements for Initial Setup Service Laptop Requirements Physical Modem Setting Up the Service LaptopSelect Dont Detect my Modem I will select it from a list Setting Up the Dial-Up PPP Support Windows 2000 EnvironmentNetwork Connection Wizard opens Setting Up Dial-Up Networking Windows 2000 EnvironmentClick Connect directly to another computer, then click Next Click PropertiesClick the Networking tab Highlight Dialup Networking S... and click Properties Start Settings Control Panel ModemsSetting Up Dial-Up Networking Windows NT 4.0 Environment Click ConfigureSet the Initial speed bps to Set Accept any authentication including clear text to on Clear the check box Use another port if busySelect the Server assigned IP address option SP a SP B Initializing the Storage SystemInitialization Steps Turn the service laptop onOn the laptop, select My Computer Dial-up Networking For WindowsStorage Processor Networking Configuration Setup Screen SP a You will set security in a later step Network Configuration Confirmation Screen SP a On the laptop, select My Computer Dial-up Networking Storage Processor Networking Configuration Setup Screen SP B Click Apply Settings Network Configuration Confirmation Screen SP B SP Properties screen opens, as shown in Figure SP B Properties Confirm SP B SP Properties dialog box opensSetting the Port Speed Remove the Null modem cable from SP B and connect it On the laptop, select My Computer Dial-up Networking EMC CLARiiON CX300, CX500, and CX700 Initialization Guide Changing the Default Battery Test Time Setting Battery Test TimeConnecting the Service Laptop to the SP LAN Port Installing Optional Navisphere 6.X SoftwareMirrorViewUI SnapViewUI SANCopyUI AnalyzerUI Installing Software OptionsStorage System Properties dialog box opens 10.42.12.1002162/setup Setting Initial Security Parameters192.168.1.1/setup Using the Serial Cable Via the Serial Port Alternate MethodLAN Making Management and Switch or Host ConnectionsConnecting the Fibre-optic Switch/Host Cables CX700 Shown Connecting a Fibre-Optic Switch or Fibre Channel HostTrademark Information Configuring Your Host Server and Storage System
Top Page Image Contents