Quatech QSC-100 user manual Windows

Page 16

5.2Windows 2000

1.After inserting a QSC-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "OK" button.

2.The following dialog box insert the Quatech COM CD (shipped with the device). Click the "OK" button.

4.The following dialog box will display the appropriate INF file on the diskette in drive. Click the "OK" button.

5.Window will copy the INF file from the diskette and display a final dialog indication that the process is complete. Click the "Finish" button.

5.3Windows 1998

Quatech QSC-100 User's Manual

14

Image 16

Contents QSC-100 Warranty Information Declaration of Conformity Application of Council Directive Standards to which Conformity is DeclaredType of Equipment Equipment ClassQTPCI.EXE General Information IND Option --- Surge Suppression Upgrade FeaturesPart Number IND Option Factory Default Configuration Hardware ConfigurationEnable Scratchpad Register SPAD, J6 Force High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsBase Address and Interrupt Level IRQ Address Map and Special RegistersPort Address Range Enabling the Special Registers Interrupt Status RegisterDlab Bit Spad Jumper Register selected for Bit DescriptionOptions Register Enhanced Serial Adapter IdentificationClock Rate Multiplier Bit Name DescriptionRR1 RR0 Clock Rate Uart Clock Maximum Data Multiplier FrequencyWindows Configuration Windows MillenniumWindows Page Windows Viewing Resources with Device Manager Windows NT Page DOS and Other Operating Systems QTPCI.EXEQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections RS-232 Port Signal QSC-100 connector pinoutsPCI Resource Map INTA#Specifications Page Computer will not boot up TroubleshootingCannot communicate with other equipment QSC-100 Revision March

Related manuals

Manual 32 pages 37.77 Kb