Quatech QSC-100 user manual QTPCI.EXE Basic Mode display

Page 23

Quatech PCI Configuration Information Display Software

Version 1.00

INSTRUCTIONS:

------------------------

Press keys listed in the menu at the bottom of the screen.

This program only displays information. It cannot make changes. Numbers preceeded by "0x" are hexadecimal.

PCI BIOS detected, version 2.10

 

Quatech PCI adapters detected

 

---------------------------------------------

 

QSC-100 Four-port RS-232 adapter

(Hardware Revision A1)

Uses IRQ 11

 

 

Base addr 1 = 0xff80

I/O

 

_

 

 

Q - Quatech PCI adapters

M - Change to Expert Mode

N - Other PCI devices

 

X - EXIT

 

Figure 14 --- QTPCI.EXE Basic Mode display

Figure 14 shows the Expert Mode display for the QSC-100 after the "Q" key has been pressed. The information from the Basic Mode display is presented along with more details such as the Vendor and Device IDs, PCI Class Code, size of memory and I/O regions, etc. Pressing the "N" key will show similar information for all non-Quatech PCI devices in the system, including those devices integrated on the motherboard. In this example, the "Base addr 0" resource is reserved.

Quatech QSC-100 User's Manual

21

Image 23
Contents QSC-100 Warranty Information Declaration of Conformity Equipment Class Application of Council DirectiveStandards to which Conformity is Declared Type of EquipmentQTPCI.EXE General Information Part Number IND Option FeaturesIND Option --- Surge Suppression Upgrade Enable Scratchpad Register SPAD, J6 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Address Map and Special RegistersBase Address and Interrupt Level IRQ Bit Description Enabling the Special RegistersInterrupt Status Register Dlab Bit Spad Jumper Register selected forBit Name Description Options RegisterEnhanced Serial Adapter Identification Clock Rate MultiplierClock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0Windows Millennium Windows ConfigurationWindows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating SystemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port SignalINTA# PCI Resource MapSpecifications Page Cannot communicate with other equipment TroubleshootingComputer will not boot up QSC-100 Revision March
Related manuals
Manual 32 pages 37.77 Kb