Quatech QSC-100 user manual

Page 17

1.After inserting a QSC-100 for the first time, the "Add New Hardware Wizard will appear at start up. Click the "Next" button.

2.Select "Search for the best driver for you device". Click the "Next" button.

3.On the next dialog, select the "CD-ROM DRIVE" check box. Insert the Quatech COM CD (shipped with the device) into the CD-ROM DRIVE.

Click the "Next" button.

Quatech QSC-100 User's Manual

15

Image 17

Contents QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment ClassQTPCI.EXE General Information Part Number IND Option FeaturesIND Option --- Surge Suppression Upgrade Enable Scratchpad Register SPAD, J6 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Address Map and Special RegistersBase Address and Interrupt Level IRQ Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit DescriptionEnhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name DescriptionClock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0Windows Millennium Windows ConfigurationWindows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating SystemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port SignalINTA# PCI Resource MapSpecifications Page Cannot communicate with other equipment TroubleshootingComputer will not boot up QSC-100 Revision March

Related manuals

Manual 32 pages 37.77 Kb