Quatech QSC-100 user manual Specifications

Page 29
1.4 µs with 2500 pF load
40 ns with 15 pF load
1.5 µs with 2500 pF load
20 ns with 15 pF load
MC1489 or compatible +3V to +13V
-3V to -13V
120 ns typical, 175 ns max
approx. 260 mA approx. 35 mA
operating 0° to 70° storage -50° to 80°
10% to 90%

10 Specifications

Bus interface:

PCI, 32-bit bus, 5-volt only

 

IBM-compatible computers

Dimensions:

approx. 5.0" x 3.7"

Serial ports

 

Controller:

16750 with 64-byte FIFOs

Interface:

One female D-37 connector

 

Four male D-25 connectors

 

using adapter cable

Transmit drivers:

SN75150 or compatible

High-level output: +5V min, +8V typical

Low-level output: -5V max, -8V typical Switching speed

low-to-high:

high-to-low:

Receive buffers:

High-level input:

Low-level input:

Switching speed:

Power requirements

+5 volts: +/-12 volts:

Temperature:

Humidity:

Quatech QSC-100 User's Manual

27

Image 29
Contents QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment ClassQTPCI.EXE General Information Part Number IND Option FeaturesIND Option --- Surge Suppression Upgrade Enable Scratchpad Register SPAD, J6 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Address Map and Special RegistersBase Address and Interrupt Level IRQ Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit DescriptionEnhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name DescriptionClock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0Windows Millennium Windows ConfigurationWindows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating SystemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port SignalINTA# PCI Resource MapSpecifications Page Cannot communicate with other equipment TroubleshootingComputer will not boot up QSC-100 Revision March
Related manuals
Manual 32 pages 37.77 Kb