Quatech QSC-100 user manual Qtpci.Exe

Page 5

4.2	Enabling the Special Registers	10
4.3	Interrupt Status Register	10
4.4	Options Register	11
4.4.1 Enhanced Serial Adapter Identification		11
4.4.2 Clock Rate Multiplier		12
5 Windows Configuration		13
5.1	Windows Millennium	13
5.2 Windows 2000		14
5.3 Windows 1998		15
5.4 Windows 1995		16
5.5	Viewing Resources with Device Manager	18
5.6 Windows NT		19
6 DOS and Other Operating Systems		20
6.1.1 QTPCI.EXE		20
7 OS/2		23
8 External Connections		24
9 PCI Resource Map		26
10 Specifications		27
11 Troubleshooting		29

Image 5

Contents QSC-100 Warranty Information Declaration of Conformity Standards to which Conformity is Declared Application of Council DirectiveType of Equipment Equipment ClassQTPCI.EXE General Information Part Number IND Option FeaturesIND Option --- Surge Suppression Upgrade Enable Scratchpad Register SPAD, J6 Hardware ConfigurationFactory Default Configuration Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationPort Address Range Address Map and Special RegistersBase Address and Interrupt Level IRQ Interrupt Status Register Enabling the Special RegistersDlab Bit Spad Jumper Register selected for Bit DescriptionEnhanced Serial Adapter Identification Options RegisterClock Rate Multiplier Bit Name DescriptionClock Rate Uart Clock Maximum Data Multiplier Frequency RR1 RR0Windows Millennium Windows ConfigurationWindows Page Windows Viewing Resources with Device Manager Windows NT Page QTPCI.EXE DOS and Other Operating SystemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections QSC-100 connector pinouts RS-232 Port SignalINTA# PCI Resource MapSpecifications Page Cannot communicate with other equipment TroubleshootingComputer will not boot up QSC-100 Revision March

Related manuals

Manual 32 pages 37.77 Kb