Quatech QSC-100 user manual QTPCI.EXE Expert Mode display

Page 24

For users interested in even more details, PCI BIOS information can be displayed by pressing the "B" key. Pressing the "I" key displays thePCI interrupt routing table.

Quatech PCI Configuration Information Display Software

Version 1.00

Quatech PCI adapters detected

---------------------------------------------

QSC-100 Four-port RS-232 adapter

Vendor ID 0x135c, Device id 0x0050 found in slot 0x04 on bus 0x00

Device/function code = 0x98,			Revision ID = 0x01 (Hardware revision A1)
PCI Class Code = 0x070200			Communications controller, multiport serial
Subsystem Vendor ID 0x135c, Subsystem Id 0x0050
INTA# mapped to IRQ 11 (route 0x61)
Base addr	0 =	0xfc00	I/O	0X80 bytes allocated
Base addr	1 =	0xff80	I/O	0X20 bytes allocated
_

Q - Quatech PCI adapters	M - Change to Basic Mode
N - Other PCI devices	B - PCI BIOS details
X - EXIT	I - Interrupt routing details

Figure 15 --- QTPCI.EXE Expert Mode display

Quatech QSC-100 User's Manual

22

Image 24

Contents QSC-100 Warranty Information Declaration of Conformity Application of Council Directive Standards to which Conformity is DeclaredType of Equipment Equipment ClassQTPCI.EXE General Information Features IND Option --- Surge Suppression UpgradePart Number IND Option Hardware Configuration Factory Default ConfigurationEnable Scratchpad Register SPAD, J6 Force High-Speed Uart Clock X2, X4, or X8, J3-J5 Clock multiplier jumper optionsHardware Installation Jumper/connector locationsAddress Map and Special Registers Base Address and Interrupt Level IRQPort Address Range Enabling the Special Registers Interrupt Status RegisterDlab Bit Spad Jumper Register selected for Bit DescriptionOptions Register Enhanced Serial Adapter IdentificationClock Rate Multiplier Bit Name DescriptionRR1 RR0 Clock Rate Uart Clock Maximum Data Multiplier FrequencyWindows Configuration Windows MillenniumWindows Page Windows Viewing Resources with Device Manager Windows NT Page DOS and Other Operating Systems QTPCI.EXEQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections RS-232 Port Signal QSC-100 connector pinoutsPCI Resource Map INTA#Specifications Page Troubleshooting Computer will not boot upCannot communicate with other equipment QSC-100 Revision March

Related manuals

Manual 32 pages 37.77 Kb