Lincoln Electric IM648-B specifications General Options Accessories

Page 21

C-1

ACCESSORIES

C-1

 

 

 

ALWAYS USE GENUINE LINCOLN ELECTRIC ELECTRODES AND VORTECH™ NOZZLES

•Only Genuine Lincoln Electric consumables yield the best cutting performance for the PYTHON.

•The patented VORTECH™ nozzle provides an extra “kick” of swirl as the arc exits the nozzle which improves cutting performance. No other nozzle has this capability or can match its performance.

GENERAL OPTIONS /

ACCESSORIES

The following options/accessories are available for your PYTHON from your local Lincoln Distributor.

K1681-2 Undercarriage - A valet style undercarriage with pull-out handle for machine only. Provides Torch and Work Cable storage.

S22147-043- VORTECH™ nozzle with an .043” (1.2 mm) Orifice (for 35 - 60 Amps)

S22147-053- VORTECH™ nozzle with an .053” (1.3 mm) Orifice (for 60 - 85 Amps)

S22147-082- VORTECH™ nozzle with an .082” (2.1 mm) Orifice (for Gouging at 60 - 85 Amps)

S22149 - Electrode - replacement electrodes for cut- ting.

S22150 - Shield Cup - This shields the torch tip and provides more visibility to the workpiece than the drag cup. Note the shield cup does not prevent the torch tip from touching the workpiece.

•NOTE: the shield cup does not prevent the torch tip from touching the workpiece.

S22151 - Drag Cup - The drag cup protects the torch by preventing the torch from touching the workpiece.

K1571 Series - PCT 80 Torches come in 25’ and 50’ lengths in either hand held or mechanized versions.

PYTHON

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RED-D-ARC Python Electric Shock can kill SafetyPlasma ARC can injure Iii Sûreté Pour Soudage a L’Arc Précautions DE SûretéThank You Table of Contents Vii Three Phase Single Phase InstallationSafety Precautions Electric Shock can Kill Select Proper LocationHigh Frequency Interference Protection Power Input Connection Input Power Cord Connector InstallationInput Electrical Connections Input Voltage Reconnection Procedure USE on Engine Driven Power SuppliesFrame Grounding Output Connections GAS Input ConnectionsPreheat Temperature for Plasma Cutting Safety PrecautionsOperation DescriptionDesign Features Advantages Operational Features and ControlsUser Responsibility Recommended Processes and EquipmentConsumable Life Cutting CapabilityLimitations Controls and Settings Safety LED Procedure Recommendations Pilot ARC DiscussionThick Sections of Metal ARC Start Machine InterfaceARC Initiated ARC VoltageGeneral Options Accessories AccessoriesInput Filter Capacitor Discharge Procedure MaintenancePeriodic Maintenance Routine MaintenanceHOW to USE Troubleshooting Guide TroubleshootingYour local Lincoln Authorized Field Service Facility Python powers up properly 1. Press Purge button on the front Possible fault in Output Power board Or dross Symptom Check Wiring Diagram Python Code Shown for 400-460VAC Operation Slow Blow DiagramsWiring Diagram for Code Wiring Diagram for Code Dimension Print Python Precaucion Warnung
Top Page Image Contents