Lincoln Electric IM587-B Input Cable Assemblies, K683-3 Dual Procedure Switch, Spindle Adapters

Page 33

C-2

ACCESSORIES

C-2

 

 

 

INPUT CABLE ASSEMBLIES:

K1797-25

Consists of a 14-conductor control cable extension 25ʼ in length.

K683-3 DUAL PROCEDURE SWITCH

Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5m) con- trol cable and 5-pin plug with two leads to connect to gun trigger.

K1797-50

Consists of a 14-conductor control cable extension 50ʼ in length.

Note: Extensions can only be connected up to 100ʼ Maximum length.

K1520-1 115V/42V TRANSFORMER KIT

Required to use LN-10 with Lincoln Power Sources without 42VAC auxiliary and a 14-pin connector recep- tacle. These power sources include the DC-250, DC-

600(Below Code 10500), DC-1000 and Pulse Power

500.Also can be used with older DC-400 models.

SPINDLE ADAPTERS:

K162H (Not required for LN-10 Bench Models) Spindle for boom mounting Readi-Reels and 2" (51

mm)I.D. spools with 60 lb. (27.2 kg) capacity. User mounted to appropriately prepared boom framework. Includes an easily adjustable friction brake for control of overrun.

When a 2" (51 mm) spindle is used with Readi-Reels or coils not on 12" (305 mm) O.D. spools, an adapter is required:

K590-4 WATER CONNECTION KIT

Includes water cooled gun tube fittings and self-sealing outlet and inlet quick-connectors for mounting into the DH wire drive connection box.

K659-1 GAS GUARD REGULATOR

Adjustable flow regulator with removable adjustor key for CO2 and Argon blend gases. Mounts onto wire drive gas inlet, and reduces gas waste and arc start "blow" by reducing surge caused by excess pressure in supply hose.

Coil Adapter:

K1504-1Permits 50 lb to 60 lb (22.7-27.2 Kg.) Coils to be mounted on 2” (51 mm) O.D. spindles.

K435 Permits 14 lb. (6 kg) Innershield coils to be mounted on 2" (51 mm) O.D. spindles.

K468 Permits 8" (203 mm) O.D. spools to be mount- ed on 2" (51 mm) O.D. spindles.

K1449-1 DUAL PROCEDURE REMOTE CONTROL

Includes a remote control box with a 16 ft. (5 m) length control cable with 4-pin plug for the mating receptacle on the bottom of the LN-10 control box. The remote con- trol box contains a procedure selector switch and 2 rotating knob encoders, one controls arc voltage and the other controls wire feed speed, which function the same as comparable controls on the LN-10 front panel, when the remote is connected and selected by the LN-10 Procedure Key.

Readi-Reel Adapters:

K363P Adapts Lincoln Readi-Reel coils of electrode 30 lb. (14 kg) and 22 lb. (10 kg) to a 2" (51 mm) spin- dle. Durable molded plastic one piece construction. Designed for easy loading; adapter remains on spin- dle for quick changeover.

K438 Adapts Lincoln Readi-Reel coils of electrode 50-60 lb. (22.7-27.2 kg) to a 2" (51 mm) spindle.

K1450-”L”- Extension cables are available in lengths “L” of 12, 16 or 25 ft. (3.6, 4.9 or 7.6) to match the con- trol to Feeder cable length used.

K683-1 DUAL PROCEDURE SWITCH

Requires K686-2 Adapter for LN-10. Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5 m) control cable and 3- pin plug. K686-2 Adapter permits 3-pin plug and 5-pin gun trigger plug to be connected to LN-10 5-pin Trigger/Dual Procedure receptacle.

GUN ADAPTERS (FOR 10 SERIES WIRE DRIVE)

The LN-10 wire feeder is equipped with a factory installed K1500-2 gun connection kit. This kit is for guns having a Tweco #2-#4 type connector. The LN- 10 has been designed to make connecting a variety of guns easy and inexpensive with the K1500 series of gun connection kits. Gun trigger and dual procedure lead connections connect to the single 5 pin recepta- cle on the front of the feed head box.

LN-10

Page 32 Page 34
Image 33
Page 32 Page 34
Contents LN-10 Heads & Controls IM587-B Safety Electric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionMar. ʻ93 On-Line Product Registration Please Examine Carton and Equipment For Damage ImmediatelyTable of Contents Diagrams Section F ViiP311 Series LN-10 General DescriptionInstallation of the LN-10 Boom Mount Wire Feeder Components Safety PrecautionsMounting the 10 Series Double Header Wire Drive Recommended Processes and EquipmentMounting Synergic 7F Wire Drive Unit K679-1 or Connecting Wire Drive Unit to Control BoxMounting the LN-10 Control Box Control Speed Range Setting Wire Drive Speed Range SelectionSeries Wire Drive Ratio Selection Electrode RoutingProcedure to Install Drive Roll and Wire Guides Wire Feed Drive Roll KitsSynergic 7F Wire Drive 4-Roll Kits KP655 and KP656 Series Wire Drive Roll Kit Installation KP1505 and KP1507GUN and Cable Assemblies with FAST-MATE Connection GUN and Cable Assemblies with Standard ConnectionGmaw Guns Innershield GunsGun Cable Connection with Fast-Mate Connection Series Wire Drive Water Connections for Water Cooled GunsGmaw Shielding Gas Cylinder may explode if damagedInput Cable LN-10 Control to Power Source Electrical InstallationDual Procedure Switch Options Optional Features InstallationBoom and Bench Conversions Materials Required for bench to boom conversionSafety Precautions LN-10 Control DIP Switch SetupSetup DIP Switch Access Operating InstructionsSetting the DIP Switches Wire Drive Head SelectionWelding Power Source Selection Step Trigger Mode Operation Selection Metric/English Wire Feed Speed Display SelectionSecurity Mode Selection Robotics Mode SelectionMaximum Limits Setting Mode Selection S2 switch 2 on = 4-Step without current interlock operationS2 switch 6 on Minimum Limits Setting mode on Minimum Limits Setting Mode SelectionKeypad and Display Operation Power-Down SaveKeypad and Display Description Operation KeysTrigger Mode Selection Trigger Mode Select KeyDisplay Control Keys Control Select key enables operator to Security ModeAcceleration Selection Digital Memory VoltmeterMaximum and Minimum Limits Setting Modes Wire Reel Loading READI-REELS, Spools or Coils Dual Procedure Remote Control K1449-1Drive Roll Pressure Setting Feeding Electrode and Brake AdjustmentProcedure for Setting Angle of Feedplate GAS Guard Regulator SettingMaking a Weld Wire Reel Changing Wire Feed Overload ProtectionGrounding Lead Protector Display Prompt or Error Explanation of Prompting and Error MessagesCored Electrode Wire Size Solid Steel ElectrodeAluminum Electrode Aluminum Electrode For use with Binzel Guns OnlyK1449-1 Dual Procedure Remote Control K683-3 Dual Procedure SwitchK683-1 Dual Procedure Switch GUN Adapters for 10 Series Wire DriveGUN and Cable Assemblies K1634-1 Wire Reel Enclosure KIT K1558-1 Remote Switch Interface ModuleK1561-1 Robotics Interface Module K1557-1 Swivel MountRoutine Maintenance MaintenanceAvoiding Wire Feeding Problems Periodic MaintenanceHOW to USE Troubleshooting Guide TroubleshootingContact your local Lincoln Authorized Field Service FacilityProblems Symptoms Recommended Course of Action Contact your local Lincoln Authorized Field Service Facility Troubleshooting Problems Possible Recommended Troubleshooting Voltage DIP switch S1 is incorrectly set for Electric Shock can kill Procedure for Replacing PC BoardsDiagrams Diagrams 10-STT/ Wire DRI VE Dimension Print Wire Drive Dimension Print Boom Model Control Box Precaucion Warnung

IM587-B specifications

The Lincoln Electric IM587-B is a versatile and innovative welding machine designed to meet the diverse needs of professionals in industrial welding applications. This compact yet powerful machine is part of Lincoln Electric's well-established line of welding solutions and features a number of advanced technologies that enhance performance, reliability, and ease of use.

One of the standout characteristics of the IM587-B is its multi-process capability. This machine supports multiple welding processes, including MIG, TIG, and stick welding, making it suitable for a wide range of materials and applications. This versatility allows users to tackle different projects without the need for multiple machines, saving both time and cost.

The IM587-B is powered by a robust inverter technology, which provides a smooth and stable arc while optimizing energy consumption. Inverter technology is known for its lightweight design and enhanced portability, making the IM587-B easy to transport to job sites or move around in the workshop. The inverter also contributes to improved duty cycles, allowing for longer periods of welding without overheating.

Another significant feature of the IM587-B is its advanced control panel, which offers intuitive operation with easy-to-read digital displays. Users can quickly adjust settings for voltage, wire feed speed, and other parameters, ensuring optimal performance for different welding tasks. This user-friendly interface is particularly advantageous for both novice and experienced welders, as it minimizes the learning curve and increases productivity.

Safety is a critical consideration in any welding operation, and the IM587-B incorporates several protective features. This includes thermal overload protection, which safeguards the machine from overheating, as well as input power protection to ensure stable operation. Additionally, the machine is designed with a durable casing that can withstand the rigors of industrial environments.

The Lincoln Electric IM587-B also boasts impressive welding capabilities, with the ability to handle a variety of materials, from mild steel to stainless steel and aluminum. Its weld quality is enhanced by features such as adjustable inductance control, which allows users to refine the arc characteristics, resulting in cleaner welds with less spatter.

In summary, the Lincoln Electric IM587-B is a highly capable welding machine that combines advanced technology, user-friendly features, and exceptional versatility. With its multi-process capabilities, lightweight inverter design, intuitive controls, and robust safety features, it is an excellent choice for professionals looking to achieve high-quality welds across various applications. This machine not only meets the demands of industry but also adapts to the evolving needs of today's welders.
Top Page Image Contents