Lincoln Electric IM587-B manual GUN and Cable Assemblies

Page 34

C-3

ACCESSORIES

C-3

 

 

 

Magnum 200/300/400 Guns

The easiest and least expensive way to use Magnum 200/300/400 guns with the LN-10 wire feeder is to order them with the K466-2 connector kit, or to buy a completely assembled Magnum gun having the K466-

2connector (such as the K497-21,-22,-23 dedicated Magnum 400 guns and the K497-20,-21 dedicated Magnum 200 guns).

GUN RECEIVER BUSHINGS AND GUN ADAPTERS K489-7 (Dual Schedule Fast-Mate Adapter)

This adapter installs directly into the wire drive feed- plate, to provide for use of guns with Fast-Mate or European style gun connections. This K489-7 will handle both standard Fast-Mate and Dual Schedule Fast-Mate guns.

Magnum 550 Guns

GUN AND CABLE ASSEMBLIES

The easiest and least expensive way to use the

The following Lincoln gun and cable assemblies are

Magnum 550 guns with LN-10 wire feeders is to order

compatible with 10 Series Wire Feed heads with

the gun with the K613-2 connector kit, and install a

appropriate K1500 Gun Adapter:

K1500-3 gun connection kit to the wire feeder.

 

Lincoln Innershield and Sub Arc Guns

K126 (Requires K1500-1) Innershield gun and cable

All of these guns can be connected to the LN-10 by

assemblies are rated at 350 amps, 60% duty cycle.

using the K1500-1 Adapter Kit.

(Consult sales specifications for appropriate models)

Lincoln Fume Extraction Guns

K115 (Requires K1500-1) Innershield gun and cable

The K556 (250XA) and K566 (400XA) guns require

assemblies are rated at 450 amps, 60% duty cycle.

that a K489-7 Fast-Mate adapter kit be installed.

(Consult sales specifications for appropriate models)

 

The K206, K289, and K309

K470 (With K466-9 requires K1500-2) Magnum 300

require only the installation of a K1500-1 connector in

GMAW gun and cable assemblies are rated 300

the LN-10 wire feeder.

amps, 60% duty cycle. (Consult sales specifications

 

Non-Lincoln Guns

for appropriate models)

 

Most competitive guns can be connected to the LN-10

K471 (With K466-9 requires K1500-2) Magnum 400

by using one of the K1500 series adapter kits.

 

GMAW gun and cable assemblies are rated 400

K1500-1(Lincoln Innershield gun standard connection)

amps, 60% duty cycle. (Consult sales specifications

for appropriate models)

Use this kit to connect the following guns: Guns having a

 

Lincoln standard innershield gun connector, Magnum

K497 (With K466-9 requires K1500-2) Magnum 200

200/300/400 with K466-1 connector kit, and Magnum 550

guns with the K613-1 gun connection kit.

GMAW gun and cable assemblies are rated 200

amps, 60% duty cycle. (Consult sales specifications

 

K1500-2(Tweco #2-#4 type connection)

for appropriate models)

 

The K1500-2 gun adapter comes factory installed on the

K541 (With K466-9 requires K1500-2) Magnum 400

LN-10 wire feeder. Use this adapter for guns that have a

Tweco #2-#4 connector. Such guns include Magnum

Short Neck GMAW gun and cable assemblies are

rated 400 amps, 60% duty cycle. (Consult sales

200/300/400 guns with K466-2 connector kit, and complete-

specifications for appropriate models)

ly factory assembled Magnum guns that are factory

 

equipped with the K466-2 connector (such as the K471-21, -

K598 (With K613-7 requires K1500-3) Magnum 550

22, and -23 dedicated Magnum 400 guns and the K497-20

and -21 Magnum 200 guns).

GMAW gun and cable assemblies are rated 550

K1500-3(Tweco #5 connection)

amps, 60% duty cycle. (Consult sales specifications

for appropriate models) The following Lincoln gun and

For Magnum 550 gun with K613-2 Connection Kit,

cable assemblies are equipped with a Fast-Mate™

and any other gun having a Tweco #5 connector .

connector. They can be used with 10 Series wire feed

 

K1500-4(Miller connection)

models by installing a K489-2 Fast-Mate™ adapter kit

and a K1500-1 Lincoln Gun adapter.

For any gun having a newer style Miller connector.

 

K684 Magnum "Super Cool" FM water cooled GMAW gun and cable assemblies are rated 450 amps, 100% duty cycle (CO2). (Consult sales specifi- cations for appropriate models)

LN-10

Page 33 Page 35
Image 34
Page 33 Page 35
Contents LN-10 Heads & Controls IM587-B Safety Electric Shock can kill Welding and Cutting Sparks can Cause fire or explosion IiiMar. ʻ93 Please Examine Carton and Equipment For Damage Immediately On-Line Product RegistrationTable of Contents Vii Diagrams Section FP311 Series General Description LN-10Mounting the 10 Series Double Header Wire Drive Safety PrecautionsInstallation of the LN-10 Boom Mount Wire Feeder Components Recommended Processes and EquipmentConnecting Wire Drive Unit to Control Box Mounting Synergic 7F Wire Drive Unit K679-1 orMounting the LN-10 Control Box Series Wire Drive Ratio Selection Wire Drive Speed Range SelectionControl Speed Range Setting Electrode RoutingSynergic 7F Wire Drive 4-Roll Kits KP655 and KP656 Wire Feed Drive Roll KitsProcedure to Install Drive Roll and Wire Guides Series Wire Drive Roll Kit Installation KP1505 and KP1507Gmaw Guns GUN and Cable Assemblies with Standard ConnectionGUN and Cable Assemblies with FAST-MATE Connection Innershield GunsGmaw Shielding Gas Series Wire Drive Water Connections for Water Cooled GunsGun Cable Connection with Fast-Mate Connection Cylinder may explode if damagedElectrical Installation Input Cable LN-10 Control to Power SourceBoom and Bench Conversions Optional Features InstallationDual Procedure Switch Options Materials Required for bench to boom conversionSetup DIP Switch Access LN-10 Control DIP Switch SetupSafety Precautions Operating InstructionsWire Drive Head Selection Setting the DIP SwitchesWelding Power Source Selection Metric/English Wire Feed Speed Display Selection Step Trigger Mode Operation SelectionMaximum Limits Setting Mode Selection Robotics Mode SelectionSecurity Mode Selection S2 switch 2 on = 4-Step without current interlock operationMinimum Limits Setting Mode Selection S2 switch 6 on Minimum Limits Setting mode onKeypad and Display Description Power-Down SaveKeypad and Display Operation Operation KeysTrigger Mode Select Key Trigger Mode SelectionDisplay Control Keys Acceleration Selection Security ModeControl Select key enables operator to Digital Memory VoltmeterMaximum and Minimum Limits Setting Modes Dual Procedure Remote Control K1449-1 Wire Reel Loading READI-REELS, Spools or CoilsFeeding Electrode and Brake Adjustment Drive Roll Pressure SettingGAS Guard Regulator Setting Procedure for Setting Angle of FeedplateMaking a Weld Wire Feed Overload Protection Wire Reel ChangingGrounding Lead Protector Explanation of Prompting and Error Messages Display Prompt or ErrorAluminum Electrode Wire Size Solid Steel ElectrodeCored Electrode Aluminum Electrode For use with Binzel Guns OnlyK683-1 Dual Procedure Switch K683-3 Dual Procedure SwitchK1449-1 Dual Procedure Remote Control GUN Adapters for 10 Series Wire DriveGUN and Cable Assemblies K1561-1 Robotics Interface Module K1558-1 Remote Switch Interface ModuleK1634-1 Wire Reel Enclosure KIT K1557-1 Swivel MountAvoiding Wire Feeding Problems MaintenanceRoutine Maintenance Periodic MaintenanceTroubleshooting HOW to USE Troubleshooting GuideAuthorized Field Service Facility Contact your local LincolnProblems Symptoms Recommended Course of Action Contact your local Lincoln Authorized Field Service Facility Troubleshooting Problems Possible Recommended Troubleshooting Voltage DIP switch S1 is incorrectly set for Procedure for Replacing PC Boards Electric Shock can killDiagrams Diagrams 10-STT/ Wire DRI VE Dimension Print Wire Drive Dimension Print Boom Model Control Box Precaucion Warnung

IM587-B specifications

The Lincoln Electric IM587-B is a versatile and innovative welding machine designed to meet the diverse needs of professionals in industrial welding applications. This compact yet powerful machine is part of Lincoln Electric's well-established line of welding solutions and features a number of advanced technologies that enhance performance, reliability, and ease of use.

One of the standout characteristics of the IM587-B is its multi-process capability. This machine supports multiple welding processes, including MIG, TIG, and stick welding, making it suitable for a wide range of materials and applications. This versatility allows users to tackle different projects without the need for multiple machines, saving both time and cost.

The IM587-B is powered by a robust inverter technology, which provides a smooth and stable arc while optimizing energy consumption. Inverter technology is known for its lightweight design and enhanced portability, making the IM587-B easy to transport to job sites or move around in the workshop. The inverter also contributes to improved duty cycles, allowing for longer periods of welding without overheating.

Another significant feature of the IM587-B is its advanced control panel, which offers intuitive operation with easy-to-read digital displays. Users can quickly adjust settings for voltage, wire feed speed, and other parameters, ensuring optimal performance for different welding tasks. This user-friendly interface is particularly advantageous for both novice and experienced welders, as it minimizes the learning curve and increases productivity.

Safety is a critical consideration in any welding operation, and the IM587-B incorporates several protective features. This includes thermal overload protection, which safeguards the machine from overheating, as well as input power protection to ensure stable operation. Additionally, the machine is designed with a durable casing that can withstand the rigors of industrial environments.

The Lincoln Electric IM587-B also boasts impressive welding capabilities, with the ability to handle a variety of materials, from mild steel to stainless steel and aluminum. Its weld quality is enhanced by features such as adjustable inductance control, which allows users to refine the arc characteristics, resulting in cleaner welds with less spatter.

In summary, the Lincoln Electric IM587-B is a highly capable welding machine that combines advanced technology, user-friendly features, and exceptional versatility. With its multi-process capabilities, lightweight inverter design, intuitive controls, and robust safety features, it is an excellent choice for professionals looking to achieve high-quality welds across various applications. This machine not only meets the demands of industry but also adapts to the evolving needs of today's welders.
Top Page Image Contents