Lincoln Electric IM587-B manual Optional Features Installation, Boom and Bench Conversions

Page 17

A-9

INSTALLATION

A-9

 

 

 

OPTIONAL FEATURES

INSTALLATION

Dual Procedure Switch Options

K683-1Dual Procedure Switch (One per gun) - Requires K686-2 Adapter for LN-10. Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5 m) control cable and 3- pin plug. K686-2 Adapter permits 3-pin plug and 5-pin gun trigger plug to be connected to LN-10 5-pin Trigger/Dual Procedure receptacle.

Connect the 5-pin plug of the K686-2 Adapter to the LN-10 Wire Feeder Trigger/Dual Procedure 5-socket receptacle.

The 3-pin plug of the K683-1 Dual Procedure switch connects to the 3-socket receptacle of the Adapter, and the 5-pin plug of the welding un connects to the 5- socket receptacle of the Adapter.

K683-3Dual Procedure Switch Kit includes gun switch, and mountings for Lincoln Innershield and Magnum guns, with 15 ft. (4.5m) control cable and 5- pin plug with two leads to connect to gun trigger.

Connect the 5-pin plug of the K683-3 Dual procedure Switch to the LN-10 Wire Feeder Trigger/Dual Procedure 5-socket receptacle.

The two lead plug cord extending out of the 5-pin plug of the Dual Procedure switch is to be connected to the two trigger leads of the welding gun per the instruc- tions shipped with the kit.

K1449-1Dual Procedure Remote Control

Provides remote rotating knob encoder control of Wire Feed Speed and Voltage, along with a dual procedure selector switch, when the remote control is connected and REMOTE is selected by the LN-10 Procedure key. The LN-10 A or B procedure light will also be on to indicate which procedure is selected by the remote control.

The 4-pin plug of the remote control connects to the mating receptacle on the bottom of the LN-10 Control box.

The K1450-”L” Extension cable is used to extend the 16 ft (5m) cable attached to the remote control. Lengths “L” are available to match the Length of the control to boom mount wire drive cable being used.

K1561-1Robotics Interface Module - The module plugs directly into the LN-10 control board and pro- vides an interface to a properly equipped Fanuc robot.

When installed and properly configured, the K1561-1 Robotics Interface Module allows complete control of the welding process from the robot controller.

The Lincoln Electric Companyʼs Automation Center should be contacted for questions regarding installa- tion or operation of the Robotics Interface Module.

All other options, see ACCESSORIES section, are shipped with installation instructions.

BOOM AND BENCH CONVERSIONS

The modular design of these feeders allows them to be converted from bench to boom models or vise versa. Some additional parts are required to make this conversion.

Materials Required for bench to boom conversion:

S13100-197Plug and Lead assembly, allows a con- trol cable to connect from control box to the wire drive.

G2868 Mounting Bracket, allows reed switch to be relocated to control box.

K1498-16 AND K1498-25Control Box to Wire Drive, Control cable and power cable from control box to wire drive.

Materials Required for boom to bench conversion:

L10286-1Wire Reel Stand, for LN-10 or STT-10, mount the reed switch onto the reel stand.

S22777 Control Box Support Bracket, to mount the control box onto the wire drive.

S13100-198Plug and Lead Assembly, electrical con- nection between control box and wire drive.

LN-10

Page 16 Page 18
Image 17
Page 16 Page 18
Contents LN-10 Heads & Controls IM587-B Safety Electric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionMar. ʻ93 On-Line Product Registration Please Examine Carton and Equipment For Damage ImmediatelyTable of Contents P311 Series Diagrams Section FVii LN-10 General DescriptionInstallation of the LN-10 Boom Mount Wire Feeder Components Safety PrecautionsMounting the 10 Series Double Header Wire Drive Recommended Processes and EquipmentMounting the LN-10 Control Box Mounting Synergic 7F Wire Drive Unit K679-1 orConnecting Wire Drive Unit to Control Box Control Speed Range Setting Wire Drive Speed Range SelectionSeries Wire Drive Ratio Selection Electrode RoutingProcedure to Install Drive Roll and Wire Guides Wire Feed Drive Roll KitsSynergic 7F Wire Drive 4-Roll Kits KP655 and KP656 Series Wire Drive Roll Kit Installation KP1505 and KP1507GUN and Cable Assemblies with FAST-MATE Connection GUN and Cable Assemblies with Standard ConnectionGmaw Guns Innershield GunsGun Cable Connection with Fast-Mate Connection Series Wire Drive Water Connections for Water Cooled GunsGmaw Shielding Gas Cylinder may explode if damagedInput Cable LN-10 Control to Power Source Electrical InstallationDual Procedure Switch Options Optional Features InstallationBoom and Bench Conversions Materials Required for bench to boom conversionSafety Precautions LN-10 Control DIP Switch SetupSetup DIP Switch Access Operating InstructionsWelding Power Source Selection Setting the DIP SwitchesWire Drive Head Selection Step Trigger Mode Operation Selection Metric/English Wire Feed Speed Display SelectionSecurity Mode Selection Robotics Mode SelectionMaximum Limits Setting Mode Selection S2 switch 2 on = 4-Step without current interlock operationS2 switch 6 on Minimum Limits Setting mode on Minimum Limits Setting Mode SelectionKeypad and Display Operation Power-Down SaveKeypad and Display Description Operation KeysDisplay Control Keys Trigger Mode SelectionTrigger Mode Select Key Control Select key enables operator to Security ModeAcceleration Selection Digital Memory VoltmeterMaximum and Minimum Limits Setting Modes Wire Reel Loading READI-REELS, Spools or Coils Dual Procedure Remote Control K1449-1Drive Roll Pressure Setting Feeding Electrode and Brake AdjustmentMaking a Weld Procedure for Setting Angle of FeedplateGAS Guard Regulator Setting Grounding Lead Protector Wire Reel ChangingWire Feed Overload Protection Display Prompt or Error Explanation of Prompting and Error MessagesCored Electrode Wire Size Solid Steel ElectrodeAluminum Electrode Aluminum Electrode For use with Binzel Guns OnlyK1449-1 Dual Procedure Remote Control K683-3 Dual Procedure SwitchK683-1 Dual Procedure Switch GUN Adapters for 10 Series Wire DriveGUN and Cable Assemblies K1634-1 Wire Reel Enclosure KIT K1558-1 Remote Switch Interface ModuleK1561-1 Robotics Interface Module K1557-1 Swivel MountRoutine Maintenance MaintenanceAvoiding Wire Feeding Problems Periodic MaintenanceHOW to USE Troubleshooting Guide TroubleshootingContact your local Lincoln Authorized Field Service FacilityProblems Symptoms Recommended Course of Action Contact your local Lincoln Authorized Field Service Facility Troubleshooting Problems Possible Recommended Troubleshooting Voltage DIP switch S1 is incorrectly set for Electric Shock can kill Procedure for Replacing PC BoardsDiagrams Diagrams 10-STT/ Wire DRI VE Dimension Print Wire Drive Dimension Print Boom Model Control Box Precaucion Warnung

IM587-B specifications

The Lincoln Electric IM587-B is a versatile and innovative welding machine designed to meet the diverse needs of professionals in industrial welding applications. This compact yet powerful machine is part of Lincoln Electric's well-established line of welding solutions and features a number of advanced technologies that enhance performance, reliability, and ease of use.

One of the standout characteristics of the IM587-B is its multi-process capability. This machine supports multiple welding processes, including MIG, TIG, and stick welding, making it suitable for a wide range of materials and applications. This versatility allows users to tackle different projects without the need for multiple machines, saving both time and cost.

The IM587-B is powered by a robust inverter technology, which provides a smooth and stable arc while optimizing energy consumption. Inverter technology is known for its lightweight design and enhanced portability, making the IM587-B easy to transport to job sites or move around in the workshop. The inverter also contributes to improved duty cycles, allowing for longer periods of welding without overheating.

Another significant feature of the IM587-B is its advanced control panel, which offers intuitive operation with easy-to-read digital displays. Users can quickly adjust settings for voltage, wire feed speed, and other parameters, ensuring optimal performance for different welding tasks. This user-friendly interface is particularly advantageous for both novice and experienced welders, as it minimizes the learning curve and increases productivity.

Safety is a critical consideration in any welding operation, and the IM587-B incorporates several protective features. This includes thermal overload protection, which safeguards the machine from overheating, as well as input power protection to ensure stable operation. Additionally, the machine is designed with a durable casing that can withstand the rigors of industrial environments.

The Lincoln Electric IM587-B also boasts impressive welding capabilities, with the ability to handle a variety of materials, from mild steel to stainless steel and aluminum. Its weld quality is enhanced by features such as adjustable inductance control, which allows users to refine the arc characteristics, resulting in cleaner welds with less spatter.

In summary, the Lincoln Electric IM587-B is a highly capable welding machine that combines advanced technology, user-friendly features, and exceptional versatility. With its multi-process capabilities, lightweight inverter design, intuitive controls, and robust safety features, it is an excellent choice for professionals looking to achieve high-quality welds across various applications. This machine not only meets the demands of industry but also adapts to the evolving needs of today's welders.
Top Page Image Contents