Lincoln Electric IM917-A manual Safety

Page 7

vi

SAFETY

vi

 

 

 

Electromagnetic Compatibility (EMC)

The size of the surrounding area to be considered will depend on the structure of the building and other activities that are taking place. The surrounding area may extend beyond the boundaries of the premises.

Methods of Reducing Emissions

Mains Supply

Welding equipment should be connected to the mains supply according to the manufacturer’s recommenda- tions. If interference occurs, it may be necessary to take additional precautions such as filtering of the mains supply. Consideration should be given to shielding the supply cable of permanently installed welding equip- ment, in metallic conduit or equivalent. Shielding should be electrically continuous throughout its length. The shielding should be connected to the welding power source so that good electrical contact is maintained between the conduit and the welding power source enclosure.

Maintenance of the Welding Equipment

The welding equipment should be routinely maintained according to the manufacturer’s recommendations. All access and service doors and covers should be closed and properly fastened when the welding equip- ment is in operation. The welding equipment should not be modified in any way except for those changes and adjustments covered in the manufacturers instructions. In particular, the spark gaps of arc striking and stabilizing devices should be adjusted and maintained according to the manufacturer’s recommendations.

Welding Cables

The welding cables should be kept as short as possible and should be positioned close together, running at or close to floor level.

Equipotential Bonding

Bonding of all metallic components in the welding installation and adjacent to it should be considered. However, metallic components bonded to the work piece will increase the risk that the operator could receive a shock by touching these metallic components and the electrode at the same time. The operator should be insulated from all such bonded metallic components.

Earthing of the Workpiece

Where the workpiece is not bonded to earth for electrical safety, not connected to earth because of its size and position, e.g., ships hull or building steelwork, a connection bonding the workpiece to earth may reduce emissions in some, but not all instances. Care should be taken to prevent the earthing of the workpiece increasing the risk of injury to users, or damage to other electrical equipment. Where necessary, the connec- tion of the workpiece to earth should be made by a direct connection to the workpiece, but in some countries where direct connection is not permitted, the bonding should be achieved by suitable capacitance, selected according to national regulations.

Screening and Shielding

Selective screening and shielding of other cables and equipment in the surrounding area may alleviate prob- lems of interference. Screening of the entire welding installation may be considered for special applications. 1

_________________________

1Portions of the preceding text are contained in EN 60974-10: “Electromagnetic Compatibility (EMC) prod- uct standard for arc welding equipment.”

L10093 3-1-96H

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Power WAVE405M California Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionSûreté Pour Soudage a L’Arc Précautions DE SûretéElectromagnetic Compatibility EMC Safety Thank You Table of Contents Power Wave 405M InstallationSelect Suitable Location Safety PrecautionsCable INDUCTANCE, and ITS Effects on Pulse Welding Output CABLES, Connections and LimitationsNegative Electrode Polarity Electrode Voltage Sensing Voltage SensingTable A.1 Work Voltage SensingSystem Description Single Head Boom Feeder Configuring the SystemUP to 4 Wire Feeders Allowed Single Head FeederCombination Hard Automation Application 7INSTALLATIONA-7 Alternate Hard Automatic ApplicationControl Cable Specifications Welding with Multiple Power WavesTWO Power Waves Installation Table A.3 Voltage Sense Receptacle PIN LEAD# Function Receptacle SpecificationsDIP Switch Settings and Locations Table A.2 Wire Feeder Receptacle PIN LEAD# FunctionRecommended Processes OperationGeneral Description Recommended Processes and EquipmentCase Front Controls Required EquipmentLimitations Duty Cycle and Time PeriodMaking a Weld Nominal ProceduresFringe Procedures Welding AdjustmentsNon Synergic CV Constant Voltage WeldingARC Control Synergic CVPULSE-ON-PULSE GMAW-PP Pulse WeldingSmaw Welding Procedures for PULSE-ON-PULSE Table B.2Benefits of Pulse on Pulse from Lincoln Electric TIG GtawRecommended Welding Procedures for Power Mode Table B.3 Power ModeOptional Equipment AccessoriesFactory Installed Field InstalledCapacitor Discharge Procedure MaintenanceAlways wear a face shield and long sleeves when servicing HOW to USE Troubleshooting Guide TroubleshootingError code before the machine is turned off Using the Status LED to Troubleshoot System ProblemsError Code # Indication Error Codes for the PowerwaveAuthorized Field Service Facility Troubleshooting GuideContact your local Lincoln If the Thermal LED is also lit Troubleshooting Troubleshooting Wiring Diagrams Diagrams Connection Diagram Semi-automatic Simple System Connection DiagramDimension Print Power Wave 405M Power Wave 405M Precaucion Warnung

IM917-A specifications

The Lincoln Electric IM917-A is a highly advanced welding machine that caters to the needs of industrial and commercial applications. Designed for both expert welders and those new to the craft, this machine offers a rich combination of features and technologies that enhance performance and usability.

One of the standout features of the IM917-A is its robust inverter technology. This innovation allows the machine to provide consistent arc stability and improved control, even at low amperages. This means welders can achieve precision results in various materials, including carbon steel, stainless steel, and aluminum, without the risk of burn-through or warping. Additionally, the inverter design contributes to the IM917-A’s lightweight profile, making it portable and easy to transport to job sites.

The IM917-A employs advanced digital control systems that allow for precise adjustments and monitoring. Welders can access various pre-set programs tailored for different welding processes, significantly speeding up setup times. The intuitive user interface ensures that operators can quickly navigate through settings, achieving optimal parameters for each specific task. This ease of use makes the IM917-A accessible to less experienced welders while meeting the demands of seasoned professionals.

Another noteworthy characteristic of the IM917-A is its versatility. It supports multiple welding processes, including MIG, TIG, Stick, and flux-cored welding. This multi-process capability makes it an ideal machine for workshops looking to maximize their productivity without investing in multiple units. The ability to switch between these processes seamlessly allows users to adapt to various project requirements swiftly.

Safety is prioritized in the design of the IM917-A. It is equipped with features such as over-temperature protection and automatic shutoff, ensuring safe operation during prolonged use. Additionally, its durable construction and high-quality components enhance its reliability and longevity, making it a wise investment for businesses.

In conclusion, the Lincoln Electric IM917-A is a formidable choice for welders of all skill levels. Its combination of advanced inverter technology, user-friendly digital controls, versatile welding processes, and essential safety features sets it apart in the competitive welding equipment market. Whether for commercial, industrial, or even artistic applications, the IM917-A promises to deliver excellent performance and reliable results.
Top Page Image Contents