CHAPTER 4: INSTALLATION
Post Installation Procedures
This section contains information on how to replace battery, power, and intelligence modules.
Replacing Battery Modules
Two people are required to lift, move, install, or remove battery modules due to its weight.
1. Loosen the captive screw and slide the latch down.
2. Slide the battery module until the safety interlock engages.
3. Depress the safety interlock and lift the module out.
4. Slide the new battery module into the frame.
5. Slide the latch up and tighten the captive screw .
Replacing Power Modules
1. Loosen the captive screw .
2. While holding the door latch down, slide the power module out of the frame.
3. Slide the new power module into the frame.
4. Slide the latch up and tighten the captive screw .
29