14
Windows CE Driver
Printer Settings
Partial Cut Width
Partial cut leaves
Page 1
10 mm
Page 2
Page 1
60 mm
Page 2
Cut
Not Cut
Figure 4 • Partial Cut Diagram
Presenter Loop Length
Presenter Loop Length determines how much paper is held in the presenter loop. The presenter loop length can be set between 0 and 600 mm and the default value is 416 mm. A setting of 0 disables the presenter loop and media feed directly through the presenter.
Eject Length
Eject Length determines how much paper is exposed for the customer. The range is from 20mm to 600mm with the default set to 50mm. If the eject length is set larger than the length of the receipt, the printer will retain a portion of the receipt in the presenter unless the “Clear Presenter” option is set to “Enable”.
Present Length Addition
Presenter Length Addition is an additional length to compensate for the thickness of the kiosk wall. The range is from 0 to 255 mm with the default set to 0.
Presenter Timeout
Presenter Timeout determines how long the presenter will hold the receipt before ejecting it. The range for the timeout is from 0 to 300 seconds with the default set at 0.
Note • Presenter timeout value must have a minimum of 10 seconds in order to work properly.
TTP 2030™ Windows CE Software Integrator Guide | 4/14/2013 |