Kawasaki 840108 instruction manual Important Safeguards, Safety Rules for Worklight, Battery

Page 14

!CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

WARNING: Handling the power cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

SAFETY RULES FOR WORKLIGHT

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire.

Keep the handle of the Worklight dry, clean, and free from oil and grease.

Do not run the Worklight while carrying it at your side. The worklight heats up immediately when in use and could result in burns.

Do not use the Worklight if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

Maintain labels and nameplates on the Worklight. These carry important informa- tion. If unreadable or missing, contact Alltrade for a replacement.

Battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Do not use in a damp or wet environment.

Store out of reach of children and other untrained persons.

BATTERY

Before using battery pack, please read carefully all instructions and cautionary markings on battery pack, battery charger and product using battery.

Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode.

Do not carry battery packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects. Battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire.

The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic material by the Environmental Protection Agency. Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1-800-CLEANUP.

3

4

Image 14 Contents
Manual DE Instrucciones Para EL Taladro Inalámbrico DE Recognize Safety SYMBOLS, Words and Labels Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools CongratulationsPersonal Safety Important SafeguardsElectrical Safety Save These Instructions for Future ReferenceSafety Rules for Cordless Drill / Drivers ServiceSpecific Safety Rules AND/OR Symbols Tool USE and CareFunctional Description SymbolsSymbol Name Explanation Component Model NumberRemove Battery Pack BatteryRemoving / Attaching Battery Pack Attach Battery PackVariable Speed Trigger Switch Charging Battery PackAssembly Installing Drive BIT Into Keyless ChuckScrew Driving Torque SettingsForward / Reverse and Trigger Lock Lever Drilling MetalHints for Optimum USE Maintenance and CleaningAccessories Conductor Size in A.W.GProtecting the Environment SpecificationsYear Limited Home USE Warranty Other Consumer DO-IT-YOURSELF DIY ToolsExclusions Component #840108 Congratulations Table of ContentsRecognize Safety SYMBOLS, Words and Labels Intended USEBattery Important SafeguardsSafety Rules for Worklight Removing / Attaching Battery Pack ChargerSymbol Name Explanation Charging Battery Pack Symbol Name ExplanationSymbols Operating InstructionsReplacing the Light Bulb Adjusting the Worklight BeamMaintenance and Cleaning Service AccessoriesSpecifications Protecting the EnvironmentYear Limited Home USE Warranty Warranty PerformanceWarranty Disclaimers Component #840108 General Safety Rules for ALL Battery Operated Tools Work Area Electrical SafetyPersonal Safety Safety Rules for Cordless Reciprocating SAW Tool USE and CareSpecific Safety Rules AND/OR Symbols Charging Battery Pack Remove Battery Pack 1. Press both release120V AC Adapter Variable Speed Trigger Switch Attaching / Removing BladeGeneral Cutting Plunge CuttingMetal Cutting Battery Type Ni-Cad Year Limited Home USE Warranty Warranty Disclaimers 18V Battery Pack Congratulations Symbols Year Limited Home USE Warranty Warranty Disclaimers
Related manuals
Manual 38 pages 30.93 Kb