CHARGING BATTERY PACK
SYMBOL | NAME | EXPLANATION |
Diameter | Size of Drill Bits, |
CHARGE BATTERY PACK:
1.Make sure the trigger on the Cordless Worklight is in the “OFF” position and remove the battery pack from the Cordless Worklight.
2.Plug the 120V AC adapter into household outlet and into side of battery charger. Insert battery pack into battery charger. LED light will turn green when battery pack is fully charged (approx. 3 hours).
BATTERY PACK
120V AC
ADAPTER
LED LIGHT
BATTERY
CHARGER
|
| Grinding Wheels, etc. |
| No load speed | |
.../min | Revolutions per Minute | Revolutions, Surface Speed, |
|
| Strokes, etc. per Minute |
1,2,3, … | Ring Selector Settings | Speed, Torque or Position Settings |
OPERATING INSTRUCTIONS
Parts of this Worklight heat up almost immediately when in use. To avoid burns, use caution when handling light bulb and metal reflector. Never change a hot light bulb. Bulb must be cool to the touch before attempting to remove or replace it.
7
3.When fully charged, reattach battery pack onto Cordless Worklight, making certain latches fasten securely. Cordless Worklight will not operate properly if the battery pack is not seated properly.
SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
8
5
3
6
4
SYMBOL | NAME | EXPLANATION |
V | Volts | Voltage (Potential) |
A | Amperes | Current |
Hz | Hertz | Frequency (Cycles per Second) |
CONTROLS AND COMPONENTS:
1
2
| W | Watt | Power | |||||
| Kg | Kilograms | Weight | |||||
|
|
|
|
|
|
| Alternating Current | Type of Current |
|
|
|
|
|
|
| Direct Current | Type of Current |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| Alternating or Direct Current | Type of Current |
|
|
|
|
|
|
| Earthing Terminal | Grounding Terminal |
|
|
|
|
|
|
| ||
1.Battery Pack
2.Release Buttons on Each Side
3.120V AC Adapter
4.Charger
5.LED Charging Indicators
6.ON/OFF Switch
7.Reflector Rim
ACCESSORIES:
8. Replacement Light bulb (inside unit)
| Class II Construction | Denotes Double Insulation |
min | Minutes | Time |
s | Seconds | Time |
COMPONENT | MODEL NUMBER |
BATTERY PACK | 690506 |
120V ADAPTER | 690074 |
CHARGER | 690072 |
7