Kawasaki 840108 instruction manual Work Area, Electrical Safety, Personal Safety

Page 23

!CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

Lead from lead-based paints.

Crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

WARNING: Handling the power cord on this product may expose you to lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

Do not abuse the cord. Never use the cord to carry the tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immedi- ately. Damaged cords may create a fire.

A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.

Use battery operated tool only with specifically designated battery pack. Use of any other batteries may create risk of fire.

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is in the locked or “OFF” position before inserting battery pack. Carrying power tools with your finger on the switch or inserting battery pack into a tool with the power switch “ON” invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

3

4

Image 23
Contents Manual DE Instrucciones Para EL Taladro Inalámbrico DE Congratulations Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsSave These Instructions for Future Reference Important SafeguardsElectrical Safety Personal SafetyTool USE and Care ServiceSpecific Safety Rules AND/OR Symbols Safety Rules for Cordless Drill / DriversComponent Model Number SymbolsSymbol Name Explanation Functional DescriptionAttach Battery Pack BatteryRemoving / Attaching Battery Pack Remove Battery PackInstalling Drive BIT Into Keyless Chuck Charging Battery PackAssembly Variable Speed Trigger SwitchDrilling Metal Torque SettingsForward / Reverse and Trigger Lock Lever Screw DrivingConductor Size in A.W.G Maintenance and CleaningAccessories Hints for Optimum USEOther Consumer DO-IT-YOURSELF DIY Tools SpecificationsYear Limited Home USE Warranty Protecting the EnvironmentExclusions Component #840108 Intended USE Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsBattery Important SafeguardsSafety Rules for Worklight Charger Removing / Attaching Battery PackOperating Instructions Charging Battery Pack Symbol Name ExplanationSymbols Symbol Name ExplanationReplacing the Light Bulb Adjusting the Worklight BeamMaintenance and Cleaning Protecting the Environment AccessoriesSpecifications ServiceWarranty Performance Year Limited Home USE WarrantyWarranty Disclaimers Component #840108 General Safety Rules for ALL Battery Operated Tools Work Area Electrical SafetyPersonal Safety Tool USE and Care Safety Rules for Cordless Reciprocating SAWSpecific Safety Rules AND/OR Symbols Remove Battery Pack 1. Press both release Charging Battery Pack120V AC Adapter Attaching / Removing Blade Variable Speed Trigger SwitchPlunge Cutting General CuttingMetal Cutting Battery Type Ni-Cad Year Limited Home USE Warranty Warranty Disclaimers 18V Battery Pack Congratulations Symbols Year Limited Home USE Warranty Warranty Disclaimers