Kawasaki 840108 instruction manual Congratulations

Page 35

CONGRATULATIONS!

Thanks for choosing this product. At Alltrade, our aim is to provide you with quality products at an affordable price, and we want you to be totally satisfied with your product and our Customer Service. If any help and advice is needed, please contact us at 1-800-590-3723. Properly cared for, this tool will give you many years of satisfaction.

INTENDED USE

This tool is intended for consumer use only. Your charger and/or adapter has been designed for charging batteries of the type approved and supplied with this tool.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating, maintaining and cleaning power tools.

Always use common sense and pay particular attention to all the DANGER, WARNING, CAUTION and NOTE statements of this manual.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

NOTE provides additional information that is useful for proper use and maintenance of this tool. If a NOTE is indicated make sure it is fully understood.

BATTERY

Before using battery pack, please read carefully all instructions and cautionary markings on battery pack, battery charger and product using battery.

Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode.

Do not carry battery packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects. battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire.

The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic material by the Environmental Protection Agency. Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1-800-822-8831.

The battery is not fully charged. Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5 hours for the battery to be fully charged.

Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life.

Never over-discharge a battery by using the tool even after tool performance has decreased. Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance.

1

2

Image 35 Contents
Manual DE Instrucciones Para EL Taladro Inalámbrico DE Congratulations Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsSave These Instructions for Future Reference Important SafeguardsElectrical Safety Personal SafetyTool USE and Care ServiceSpecific Safety Rules AND/OR Symbols Safety Rules for Cordless Drill / DriversComponent Model Number SymbolsSymbol Name Explanation Functional DescriptionAttach Battery Pack BatteryRemoving / Attaching Battery Pack Remove Battery PackInstalling Drive BIT Into Keyless Chuck Charging Battery PackAssembly Variable Speed Trigger SwitchDrilling Metal Torque SettingsForward / Reverse and Trigger Lock Lever Screw DrivingConductor Size in A.W.G Maintenance and CleaningAccessories Hints for Optimum USEOther Consumer DO-IT-YOURSELF DIY Tools SpecificationsYear Limited Home USE Warranty Protecting the EnvironmentExclusions Component #840108 Intended USE Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsBattery Important SafeguardsSafety Rules for Worklight Charger Removing / Attaching Battery PackOperating Instructions Charging Battery Pack Symbol Name ExplanationSymbols Symbol Name ExplanationReplacing the Light Bulb Adjusting the Worklight BeamMaintenance and Cleaning Protecting the Environment AccessoriesSpecifications ServiceWarranty Performance Year Limited Home USE WarrantyWarranty Disclaimers Component #840108 General Safety Rules for ALL Battery Operated Tools Work Area Electrical SafetyPersonal Safety Tool USE and Care Safety Rules for Cordless Reciprocating SAWSpecific Safety Rules AND/OR Symbols Remove Battery Pack 1. Press both release Charging Battery Pack120V AC Adapter Attaching / Removing Blade Variable Speed Trigger SwitchPlunge Cutting General CuttingMetal Cutting Battery Type Ni-Cad Year Limited Home USE Warranty Warranty Disclaimers 18V Battery Pack Congratulations Symbols Year Limited Home USE Warranty Warranty Disclaimers
Related manuals
Manual 38 pages 30.93 Kb