Xantrex Technology 25, 10, 15, 30, 20 owner manual Troubleshooting LED Status

TROUBLESHOOTING LED STATUS

	LED Status			Operation Status	Notes
INVERT	CHARGE	LOW BATTERY	OVERTEMP
			OVERLOAD
Solid Green	Blinking Green	OFF	OFF	Inverting. Charger ready but no	Normal
				external AC available.
Blinking	Solid Green	OFF	OFF	Inverter is in standby.	Normal, charging current
Green				Battery is being charged.	limited if AC load exceeds
					Power Sharing setting.
Blinking	OFF	OFF	OFF	Inverter is in istandby.	If AC power is removed
Green				Charger manually turned off.	and reapplied, the charger
					will automatically turn ON.
OFF	Solid Green	OFF	OFF	Inverter OFF. Charging.	Reset the inverter by
					pushing INVERT button.
					LED should blink.
Solid Green	Blinking Green	Solid Red	*	Inverting. Charger ready but no	Warning. Battery voltage
				external AC available. Battery	less than 10 or more than
				Voltage Warning:	15 volts
				10V<VDC>15V
Solid Green	Blinking Green	*	Solid Red	Inverting. Charger ready but no	Warning. Inverter shutdown.
				external AC available. Over-
				temperature Warning
OFF	Blinking Green	Slow Blinking	*	Battery Voltage shutdown:	Inverter Shutdown.
		Red		10V< VDC >15V	Operation will resume when
					battery reaches 13.5 volts
OFF	Blinking Green	*	Slow Blinking	Charger ready but no external	Operation will automatically
			Red	AC power available. Charger	resume after unit has
				over-temperature Shutdown	cooled down
OFF	Blinking Green	*	Fast Blinking	Inverter Overload Shutdown	Reduce AC load. Manually
			Red		restart the system
OFF	Blinking Green	Fast Blinking	Fast Blinking	Backfeed Shutdown. Incorrect	Correct AC in wiring before
		Red	Red	AC wiring	use. Manually restart the
					system.
OFF	Blinking Green	Fast Blinking	OFF	Battery Ripple	Warning
		Red
* Could be either ON or OFF status.

39