Studer Innotec HPC2512, HPC7048, HPC4024 Control, Charger Inverter, Display and control parameters

STUDER INNOTEC HP-COMPACT

4 Control

4.1Display and control parameters

						POWER MONITOR
	Charger - Inverter				Charge current Inverter output
					>100		200
					[A]		[%]
INPUT LIMIT					90			160
	CHARGER	TRANSFER		STANDBY	80			130
					70			100
					60			80
					50			60
30A	100A		230V	20W	40			40
					30			20	25
0 26	0 22	150V	23	OFF 24	10		5
					20			10

AC IN						8	AC OUT
	1
					7
CHARGER			2		9		INVERTER
						20	RESET ALARM
							(select)
EQUALIZE				14		10	Over Temp
Program			4	15		11	Overload
						12	Batt Low/High
Contact active			5	16
						13
Contact manual			6	17			OFF
AUX. CONTACT		21		18	19		ON/OFF
(Program)							(Change status)

4.2 Light Emitting Diodes (LED)

LED	Marking	LED lit	LED blinks
1	AC IN	Voltage corresponding to self-	A voltage outside the self-
		adjusted values is at the AC	adjusted values is at the AC IN
		IN input.	input, or the HP-COMPACT is in
			synchronization phases
2	CHARGER	Battery charger is working	The battery charger is locked
			OFF (see chap. 4.6) or provisory
			out of order. In that last case it
			will restart within 10 seconds

User manual HP-COMPACT V3.0 E 12