Studer Innotec HPC4024, HPC2512, HPC7048, HPC5048 user manual Summary

Page 2

STUDER INNOTEC

HP-COMPACT

Summary
1	GENERAL INFORMATION	3
1.1	OPERATING INSTRUCTIONS	3
1.2	QUALITY AND WARRANTY	3
1.3	WARRANTY DISCLAIMER	3
1.4	LIABILITY DISCLAIMER	3
1.5	PRECAUTIONS	4
1.6	SPECIAL PRECAUTIONS	4
2	INTRODUCTION	5
2.1	PRINCIPLE SCHEMATIC	5
2.2	DESCRIPTION OF THE MAIN FUNCTIONS	5
2.3	BATTERY CONNECTING	6
3	MOUNTING AND INSTALLING	7
3.1	INSTALLATION PLACE	7
3.2	FIXING	8
3.3	CONNECTIONS	8
3.4	CONNECTION PLAN	9
3.5	CABLING	9
3.6	PRE-INSTALLATION SETTINGS	10
4	CONTROL	12
4.1	DISPLAY AND CONTROL PARAMETERS	12
4.2	LIGHT EMITTING DIODES (LED)	12
4.3	PUSH BUTTONS	13
4.4	TURNING KNOBS	13
4.5	THE INVERTER	13
4.6	THE BATTERY CHARGER	15
4.7	THE TRANSFER SYSTEM	17
4.8	THE MULTIFUNCTIONAL CONTACT	18
4.9	THE REMOTE CONTROL	19
4.10	THE TEMPERATURE SENSOR	19
4.11	REMOTE CONTROL FOR POWER SHARING	20
5	PROGRAMMING	20
5.1	STANDARD SETTING	20
5.2	RESET VALUE	20
5.3	BATTERY VOLTAGES AND ABSORPTION TIME	20
5.4	AUXILIARY CONTACT	21
5.5	DISABLING SOME OF THE HP-COMPACT FUNCTIONS	23
6	INSTALLATION MAINTENANCE	24
7	EC COMPLIANCE	24
8	TECHNICAL DATA	25

User manual

HP-COMPACT V3.0 E

2

Image 2

Contents User and installer Manual Summary General Information Quality and WarrantyWarranty Disclaimer Operating instructionsPrecautions Special precautionsIntroduction Remote control for Power Sharing Battery chargerRemote control Battery connectingConnection in serie Mounting and installingInstallation place Connection in parallel and in serieConnections General instructions on connectingFixing Protection cover of the terminals connectionsBattery CablingPre-installation settings Connection to batteryConnection to the 230Vac-consumer appliances AC Output Connection to Remote controlConnection to Temperature Sensor Temp Connection to the 230Vac Input AC InputDisplay and control parameters ControlCharger Inverter Inverter Push buttonsTurning Knobs Overload Battery ConditionCharge detection system „Standby Overheating Over TempCycle of charge Equalization chargingInput current repartition Power sharing Charging currentTransfer system Set the transfer voltage thresholdMultifunctional Contact Fast UPS- Mode for the Transfer SwitchDelayed mode of the Transfer System Remote Control Temperature sensorAuxiliary contact Battery voltageProgramming Table of voltage and timing thresholdSet the voltage and timing threshold PrincipleExample start of a genset with the HP-COMPACT Manual operating of Auxiliary Contact Power cut of the second priority loadsDiagram of the different modes Disabling some of the HP-COMPACT functionsInstallation Maintenance EC ComplianceTechnical Data HPC2512 HPC4024 HPC5048 HPC7048