Studer Innotec Cxxxx-S, RCC-01, CT-35, C-IP23, CFC-01 manual Xp-Compact

Page 2


STUDER INNOTEC		XP-COMPACT
English description			5
1	General Information		5
1.1	Operating instructions		5
1.2	Quality and Warranty		5
1.3	Warranty Disclaimer		5
1.4	Liability Disclaimer		6
1.5	Warning		6
1.6	Special precautions		6
2	Introduction		7
2.1	Principle schematic		7
2.2	Description of the main functions		8
2.3	Battery connecting		9
3	Mounting and installing		10
3.1	Installation place		10
3.2	Fixing		10
3.3	Connections		10
3.4	Connection Plan		11
3.5	Cabling		12
3.6	Pre-installation settings		12
4	Control		13
4.1	Display and control parameters		13
4.2	Display and control parameters on remote control panel (optional)		14
4.3	Light Emitting Diodes (LED)		14
4.4	Push buttons		15
4.5	Turning Knobs		15
4.6	The Inverter		15
4.7	The battery charger		16
4.8	The Transfer system		18
4.9	The Solar charge controller (option)		20
4.10	The Multifunctional Contact		20
4.11	The Remote Control RCC-01		21
4.12	The Temperature sensor CT-35		21
5	Programming (possible only with the remote control RCC-01)		22
5.1	Standard setting		22
5.2	Reset value (default settings)		22
5.3	Battery voltages and absorption time		22
5.4	Auxiliary contact		23
5.5	Disabling some of the XP-COMPACT functions		25
6	Installation Maintenance		26
7	Declaration of CE Compliance		26
8	Technical Data		27

XP-COMPACT V5.4

2/77

Image 2

Contents Sine wave Inverter, Battery charger, Transfersystem Studer InnotecXP-COMPACT General Information Quality and WarrantyWarranty Disclaimer Operating instructionsSpecial precautions Liability DisclaimerPrinciple schematic IntroductionDescription of the main functions Battery connecting Fixing Mounting and installingInstallation place ConnectionsSolar + Connection PlanProtection cover of the terminals connections Cabling Pre-installation settingsConnection to battery Connection to the 230Vac-consumer appliances AC OutputControl Display and control parametersCharge ChargerSolar TransferInverter Push buttonsTurning Knobs Battery charger Default values for battery voltage thresholds Equalization chargingTransfer system Charging currentCompact Fast UPS- Mode for the Transfer SwitchDelayed mode of the Transfer System Set the transfer voltage thresholdSolar charge controller option Multifunctional ContactTemperature sensor CT-35 XP-COMPACTReset value default settings Programming possible only with the remote control RCC-01Standard setting Battery voltages and absorption timePrinciple Auxiliary contactTable of voltage and timing threshold Programming of the Auxiliary ContactManual operating of Auxiliary Contact Power cut of the second priority loadsAuxiliary Contact as generator starter Diagram of the different modes Disabling some of the XP-COMPACT functionsInstallation Maintenance Declaration of CE ComplianceTechnical Data