Studer Innotec CT-35, RCC-01, Cxxxx-S, C-IP23, CFC-01 manual Description of the main functions

Page 6

STUDER INNOTEC

XP-COMPACT

connection between Neutral and earth in inverter mode only may be done by installing a bridge internally to the unit. Please contact your installer regarding this point.

(2) Remote control for remote adjustment of the input limit. (see chap. 4.6.3)

2.2Description of the main functions

2.2.1 The inverter

The sine wave inverter XP-COMPACT generates a sinusoidal AC voltage with an exceptionally precise voltage and stabilized frequency. In order to start large electric motors, the user has the possibility to use a short surge power which is 3 times the nominal power of the XP-COMPACT.

The inverter is protected against overload and short circuit. A power stage with the latest MOS-FET power transistors, a toroidal transformer, and a fast regulating system makes a robust and reliable inverter with the highest efficiency. A 1-20 Watt adjustable charge detection system allows the smallest energy consumption and ensures a long life for the battery.

2.2.2 The transfer system

XP-COMPACT can be connected to an AC source. For example a stand-by emergency generator or the AC network. With the transfer system, on one side you have an alternating voltage at the output for the use of consumer appliances. On the other side the battery park is being charged. The distribution of energy between the consumer appliances and battery charger is automatic.

2.2.3 The battery charger

The built-in battery charger is so designed that it can charge the battery quickly and fully. A microprocessor controlled, Step charging process, ensures the optimal charging of the battery. The desired charging current can be set continuously from 0 to 20/37/45 A, as per the model. The setting is made accordingly to the battery capacity and power available.

The battery charger is designed for lead-acid and lead-gel batteries. Thanks to the floating charge system the batteries can remain continuously connected.

2.2.4 The solar charge controller (optional)

With the built-in solar charge controller, the XP-COMPACT is a complete solar- power-center. In a solar installation this controller ensures that the batteries are charged correctly. With the XP-COMPACT, batteries can be charged with a generator and with the solar modules at the same time. The charging of batteries with both energy sources is carried out fully automatically.

2.2.5 Remote control

As an option, a remote control RCC-01 can be connected to XP-COMPACT. All operating features and displays, save the adjustment levels (22/23/24/26), are available on the remote control. It is supplied with a 20m long cable. This cable can be up to 40m long. On the remote control, output power and charging current are also displayed.

XP-COMPACT V5.4

8/77

Image 6
Contents Sine wave Inverter, Battery charger, Transfersystem Studer InnotecXP-COMPACT General Information Quality and Warranty Warranty Disclaimer Operating instructionsSpecial precautions Liability DisclaimerPrinciple schematic IntroductionDescription of the main functions Battery connecting Fixing Mounting and installingInstallation place ConnectionsConnection Plan Protection cover of the terminals connectionsSolar + Cabling Pre-installation settingsConnection to battery Connection to the 230Vac-consumer appliances AC OutputControl Display and control parametersCharge ChargerSolar TransferPush buttons Turning KnobsInverter Battery charger Default values for battery voltage thresholds Equalization chargingTransfer system Charging currentCompact Fast UPS- Mode for the Transfer SwitchDelayed mode of the Transfer System Set the transfer voltage thresholdSolar charge controller option Multifunctional ContactTemperature sensor CT-35 XP-COMPACTReset value default settings Programming possible only with the remote control RCC-01Standard setting Battery voltages and absorption timePrinciple Auxiliary contactTable of voltage and timing threshold Programming of the Auxiliary ContactPower cut of the second priority loads Auxiliary Contact as generator starterManual operating of Auxiliary Contact Diagram of the different modes Disabling some of the XP-COMPACT functionsInstallation Maintenance Declaration of CE ComplianceTechnical Data