Studer Innotec CFC-01 Connection Plan, Protection cover of the terminals connections, Solar +

STUDER INNOTEC XP-COMPACT

3.3.2Protection cover of the terminals connections

The protection is available as an option (Order ref. CFC-01) and avoid to do wrong hazardous connection on the terminals 230Vac. It mounted with strain relief clamps for the cable.

3.4Connection Plan

A	Battery +/-	Battery cable (already installed)
B	SOLAR +/-	Connection terminal for Solar modules
C	Remote contr.	Connection terminal for Remote Control RCC-01
D	Equalize	Slide switch for equalization of the Battery
E	Transfer delay	Slide switch for Transfer Delay
F	Temp.	Connection terminal for Temperature sensor CT-35
G	Aux. Contact	Connection terminal for Auxiliary Contact
H	AC Input	Connection terminal for AC-input. Located directly
		above this terminal is the automatic safety cut-out for
		this terminal.
J	ID Plate	Identification plate with Technical data and Serial
		number
K	AC Output	Connection terminal for AC-output
L	Caution…	Caution: Check Polarity (+/-) before connecting the
		battery !
M	Don’t…	Do not open without disconnecting all terminals
N	16A Protection	16A Protection switch for the Transfer system

XP-COMPACT V5.4 11/77