English description
1 General Information
1.1Operating instructions
This manual is part of the delivery package of every XP-COMPACT inverter-charger. It serves as guidelines for safe and efficient operation of XP-COMPACT. The instructions are only valid for use with the following devices and options:
XP-COMPACT XPC 1400-12 | |
XP-COMPACT XPC 2200-24 | |
XP-COMPACT XPC 2200-48 | |
Temperature sensor CT-35 | AC cable cover CFC-01 |
Remote Control RCC-01 | IP23 cover C-IP23 |
Solar charge controller CxxxxS | |
Every person who installs a XP-COMPACT and/or works with it must be fully familiar with the content of this manual and must follow exactly all the warning and safety instructions. Installation of or any work on the XP-COMPACT must be carried out by a skilled and trained personnel. Installation and application must comply with the respective local installations codes and safety regulations.
1.2Quality and Warranty
During production and assembling, all XP-COMPACT appliances go through many controls and tests. Production, controls and tests are carried out in accordance with firm and established procedures. Every XP-COMPACT has its own serial number, which helps to refer back to its original data in the event of controls or repairs. That is why you should never remove the identification plate showing the serial number. The production assembly and tests on all XP-COMPACT appliances are totally carried out in our company in Sion, Switzerland. The warranty for these appliances is valid for uses and operating possibilities mentioned in this manual.
The warranty period for the XP-COMPACT is 2 years.
1.3Warranty Disclaimer
We do not accept any liability for any damages occurring through use, manipulation, working situation and handling, which are not explicitly mentioned in these operating instructions.
Following cases are not covered by the warranty:
−High voltage at INPUT (i.e. 48V at the Battery INPUT of XP-COMPACT 1400- 12)
−Reverse polarity on Battery connections (+/- reversed)
−Running liquid or oxidation through condensation in the appliance
−Defects caused by force, physical or mechanical means
−Changes not explicitly authorized by STUDER INNOTEC
−Not or only partly tightened screws and nuts after change of fuses or cables connecting
−Transport damage, i.e. through bad handling and /or packing