Harbor Freight Tools 32208, 32206 manual See Figure R, See Figures T and U

4.Turn the Blade Adjusting Screw (5B) counterclockwise about 5-10 full turns.

(See Figure R.)

5.With both hands, hold the Saw Blade with its teeth pointing downward and away from your body. Then, insert the Saw Blade through the horizontal slot in the Table (36B). (See Figure S.)

6.Place the Saw Blade on the Upper and Lower Wheels (16B, 19B).

(See Figures T and U.)

FIGURE R FIGURE S

7.Position the Saw Blade in the Upper and Lower Blade Guides (29B, 32B).

(See Figures T and V.)

8.Replace the Table Insert (37B) and Table Pin (38B). (See Figure Q.)

9.Replace the Upper and Lower Wheel Guards (14B, 21B), and secure the Guards to the Bandsaw with the four Knobs (15B). (See Figure P.)

FIGURE T FIGURE U

SKU 32208/32206 For technical questions, please call 1-800-444-3353. PAGE 12