| SPECIFICATIONS |
|
|
ITEM | DESCRIPTION |
|
|
Net Weight | 160 Lbs. |
|
|
Speeds | 3000 RPM (Model 32206) / 600, 1140, 1670, 2670 RPM (Model 32208) |
|
|
Motor | Motor: 1 HP / Single Phase |
|
|
Electrical Requirements | 110V / 9 Amps |
|
|
Cutting Capacity | 6” |
|
|
Blade Thickness Ranges | 1/8” to 3/4” |
|
|
Table Dimensions | Approx. 14” x 14” |
|
|
Table Adjustments | Tilts 450 to Right / 150 to Left |
|
|
Dust Collector Accessory | Dust Chute Attachment Only (Dust Bag Not Provided) |
|
|
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagrams. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas invite injuries.
2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.
3.STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment and keep out of reach of children.
4.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
SKU 32208/32206 For technical questions, please call | PAGE 2 |