Harbor Freight Tools 32208, 32206 manual Figure Y, To Attach The Dust Chute

Page 16

FIGURE Y

FIGURE Z

To Attach The Dust Chute:

1.Remove the two Knobs (15B) located on the Lower Wheel Guard (21B). Then, remove the Lower Wheel Guard. (See Figure P.)

2.Attach the Dust Chute (22B) to the top/right corner of the Lower Wheel Guard (21B), using the two Hex Head Bolts (70B). (See Figures AA* and BB*.)

3.Replace the Lower Wheel Guard (21B) and the two Knobs (15B).

(*Figures AA and BB see page 17.)

SKU 32208/32206 For technical questions, please call 1-800-444-3353.

PAGE 16

Image 16

Contents For technical questions or replacement parts, please call Wood BandsawGeneral Safety Warnings and Precautions SpecificationsSave this Manual Specific Product Warnings and Precautions Industrial Applications Must Follow Osha RequirementsFigure a SKU 32208/32206 For technical questions, please call See Figure C and Hardware Diagram See Figure D and Hardware DiagramUnpacking Operating InstructionsHardware Diagram See Figure F and Hardware DiagramTo Assemble The Motor Onto The Stand Diagram To Assemble The Bandsaw Body To The StandFigure K See Figure KFigure L To Install The Side Panels To The Stand To Install The Saw Blade39A. See Figure N Lighted in Figure O stepSee Figures T and U See Figure RSee Figures T To Adjust The Saw Blade Tension To Adjust The Tracking Of The Saw BladeTo Adjust The Lower Blade Guide And Support Bearing To Adjust The Upper Blade Guides And Support BearingsTo Adjust The Upper Blade Guide Assembly To Attach The Guide Post Guard To Adjust The Angle Of The TableREV 04/02 Figure Y To Attach The Dust ChuteFigure AA To Operate The BandsawTroubleshooting Guide Please Read the Following Carefully Stand Assembly Diagram aREV 03/04 Assembly Diagram B Parts List Assembly B Saw Body Parts List Assembly B Saw Body Parts List Assembly C Parts List Assembly D Assembly Diagram E Assembly Diagram F Hardware Diagram Wiring Diagram