Porter-Cable PC600JS, 90546382 Operation, Blade Installation Figure B, Switching on and OFF

Page 6

90546382 PC600JS Jig Saw 12/10/08 9:11 AM Page 6

OPERATION

: Before attempting any of the following operations, make sure that the tool is switched off and unplugged and that the saw blade has stopped. Used saw blades can be hot.

BLADE INSTALLATION (FIGURE B)

-Push the saw blade locking lever (3) upward.

-With teeth facing forward, insert the shank of the saw blade into the blade holder as far as it will go.

-Release the lever.

-Check to ensure blade is secure before cutting.

B

ADJUSTING THE SHOE FOR BEVEL CUTS (FIGURE C)

: Never use the tool when the shoe is loose or removed.

The shoe plate can be set to a left or right bevel angle of up to 45°.

To set the bevel angle:

-Pull the shoe beveling lever (7) out and away from the saw to unlock the shoe (6) as shown in figure C.

-Slide the shoe forward to release it from the 0° positive stop position.

-The shoe can be beveled to the left or to the right and has detents at 15°, 30° and 45°.

C

-Set the shoe to the desired bevel angle. Use a protractor to verify angle accuracy.

-Push the shoe beveling lever back towards the saw to lock the shoe.

To reset the shoe for straight cuts:

-Pull the shoe beveling lever (7) out and away from the saw to unlock the shoe (6) as shown in figure C.

-Rotate shoe to an angle of approximately 0° and then pull shoe backwards to engage the 0° positive stop.

-Push the shoe beveling lever back towards the saw to lock the shoe.

SWITCHING ON AND OFF

-To switch the tool on, squeeze the trigger switch (1).

-For continuous operation, squeeze the trigger switch then depress the lock-on button

(2). Once lock-on button is depressed, release the trigger switch.

-To switch the tool off, release the trigger switch. To switch the tool off, when in continuous operation, squeeze the trigger and the lock will disengage.

VARIABLE SPEED CONTROL (FIGURE D)

A speed control wheel (8) is located on the top of the saw. The speed increases as the wheel is turned from a low speed setting of 1 to a high speed setting of 7.

D

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Advertencia Léase Este Catalog Number PC600JSGeneral Safety Rules Work area safetySpecific Safety Rules Safety Guidelines Definitions Symbols Functional DescriptionSwitching on and OFF Blade Installation Figure BAdjusting the Shoe for Bevel Cuts Figure C OperationLED Light Removable Shoe Sleeve Figure FRIP / Circle Cutting Figure G, H Troubleshooting Problem Possible CausePossible Solution Replacement Parts Service and Repairs Three Year Limited WarrantyMaintenance Accessories90546382 PC600JS Jig Saw 12/10/08 911 AM Manuel dinstructions DE Catalogue PC600JSAvertissements de sécurité généraux Conserver CES Directives90546382 PC600JS Jig Saw 12/10/08 911 AM Consignes DE Sécurité Particulières Symboles Lignes Directrices EN Matière DE Sécurité DéfinitionsDescription Fonctionnelle Installation DE LA Lame Figure BFonctionnement Réglage DE LA Semelle Pour DES Coupes Biseautées Figure CPour régler la semelle pour des coupes droites Commande DE LA Vitesse VariablePour régler le mode de coupe Mise EN Marche ET ArrêtCoupe de lamellés Manchon DE Semelle Amovible Figure FPour retirer le manchon de semelle, saisir le bas du Coupe du métalEntretien Problème Cause possible Solution possibleDépannage Pièces DE RechangeGarantie Limitée DE Trois ANS AccessoiresRemplacement DES Étiquettes D’AVERTISSEMENT Entretien ET RéparationHighway 45 North Jackson, Tennessee 888 Manual deinstrucciones Catálogo N PC600JSAdvertencias generales de seguridad Conserve Estas InstruccionesEsto garantizará la seguridad de la herramienta eléctrica Normas Específicas DE Seguridad Pautas DE SEGURIDAD/DEFINICIONES SímbolosInstalación DE LA Hoja Figura B OperaciónDescripción DE LAS Funciones Ajuste DE LA Zapata Para Cortes EN Bisel Figura CControl DE Velocidad Variable Figura D Para fijar la zapata para cortes rectosEncendido Y Apagado Acción DE Corte Orbital O EN Línea Recta Figura EAserrado en metal Retire LA Manga DE LA Zapata Figura FPara aserrar laminados Cortes Longitudinales Y Cortes DE Círculos Figura G, HMantenimiento Detección DE ProblemasProblema Causa posible Solución posible Piezas DE RepuestoAccesorios Garantía Limitada DE Tres AñosMantenimiento Y Reparaciones Reemplazo DE LAS Etiquetas DE AdvertenciaEspecificaciones Catalog Numbers PC600JSDEC. ‘08

90546382, PC600JS specifications

The Porter-Cable PC600JS is a highly regarded jigsaw designed for both professional craftsmen and DIY enthusiasts. This powerful tool provides versatility and precision, making it a staple in woodworking and various cutting applications.

At the heart of the PC600JS is its robust 6-amp motor, which delivers impressive power for cutting through a diverse range of materials including wood, metal, and plastic. The variable speed control allows users to adjust the speed from 0 to 3,000 strokes per minute, catering to a variety of cutting tasks. This flexibility helps ensure clean, accurate cuts across different material types.

One of the standout features of the Porter-Cable PC600JS is its four-position orbital action. This technology enhances the jigsaw's cutting efficiency, allowing users to choose the best cutting style for their specific project. Depending on the application, the user can opt for a faster, more aggressive cut or a slower, finer approach. This adaptability makes the PC600JS suitable for everything from intricate curves to straight cuts.

The tool is designed with user comfort in mind. Its lightweight design reduces hand fatigue during extended use, while the soft-grip handle provides a secure and comfortable hold. Additionally, the integrated dust blower keeps the cutting line clear of debris, allowing for improved visibility and accuracy during operation.

The PC600JS is also equipped with a tool-free blade change mechanism, which saves time and effort. This feature allows users to quickly swap out blades without the need for additional tools, making transitions between different tasks seamless and efficient.

Another notable characteristic is the included bevel plate, which permits a 0 to 45-degree angle for bevel cuts. This feature extends the versatility of the jigsaw, allowing users to create angled cuts for various woodworking projects. The clear base design also provides better sight lines, enabling precise cutting.

In summary, the Porter-Cable PC600JS jigsaw is a reliable tool that combines power, versatility, and user-friendly features. With a focus on performance and comfort, it is an excellent choice for both professionals and hobbyists looking to tackle a wide range of cutting tasks with precision and ease.
Top Page Image Contents