MODEL G0588/G0591
SLIDING TABLE SAW
MANUAL UPDATE
This update covers changes made to the machine after the owner's manual was printed. All page num- ber references refer to the owner's manual for this machine. Keep this update with your owner's man- ual for future reference. If you have questions, contact Tech Support at (570)
What Changed?
The locking system for the sliding table has been updated to include two locking mechanisms, as shown in Figure 1, and is used as noted below.
Figure 1. New sliding table handle with two lock
handles.
Center Locking Table (Figure 2): This configu- ration locks the sliding table so it is centered with the saw cabinet. This position is typically used for cuts when the sliding table must remain in a fixed position, such as with traditional rip cuts.
Freely Sliding Table (Figure 3): This configura- tion allows the sliding table to slide freely for regu- lar operation of the sliding table saw.
Extending Table (Figure 4): This configuration allows the sliding table to extend beyond its regu- lar stopping point for cutting longer workpieces or gaining access to the internal blade guard.
Figure 2. Configuration to lock the table so it is
centered with the saw cabinet.
Figure 3. Configuration to freely slide table.
Figure 4. Configuration to extend the table
beyond the regular stopping position.
COPYRIGHT © JANUARY, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR10412 PRINTED IN TAIWAN