Grizzly G0591, G0588 owner manual

L M K

N O J

Figure 2. Fence controls.

J.Rip Fence Body Lock Lever: Secures the fence body in position along the fence rail.

K.Rip Fence Scale: Allows precise measure- ment of rip cutting operations.

L.Rip Fence Lock Handle: Secures the fence face on its forward/backward slide track.

M.Micro-Adjust Knob: Precisely adjusts the fence.

N.Fence Face: The surface that the workpiece slides along.

O.Fence Body: Guides the fence along the rail and supports the fence face.

-6-

P	Q	S	T
		U

R

V

Figure 3. Blades.

P.Riving Knife: Maintains kerf opening during cutting operations. This function is crucial to preventing kickback caused by the kerf clos- ing behind the blade.

Q.Main Blade (Not Included): Performs the cutting operations.

R.Scoring Blade (Not Included): Small cut- ting blade that rotates opposite the main saw blade. The blade scores the workpiece before the actual cutting operation is per- formed preventing tear-out in laminate mate- rials. The scoring blade is adjustable left and right, up and down, and in thickness of kerf.

S.Scoring Blade Vertical Adjustment Socket: Internal cap screw adjusts the height of the scoring blade.

T.Scoring Blade Horizontal Adjustment Socket: Internal cap screw adjusts the hori- zontal position of the scoring blade in relation to the main blade.

U.Scoring Blade Lock Socket: Locks the scoring blade adjustments.

V.Lower Blade Guard: Prevents accidental contact with the blade when the table is at its full extension.

G0588/G0591 12" Sliding Table Saws