Miter Cutting
The miter fence allows miter cuts from 0˚ through 135˚. The table mounted miter scale has a resolu- tion of 1˚.
To perform a miter cut:
1.Slide the crosscut table to the front edge of the sliding table and lock it in place.
2.Install the fence as shown in Figure 62 for 90˚ to 135˚ cuts, or as shown in Figure 64 for 0˚ to 90˚ cuts.
Figure 62. Fence set-up for 90˚ to 135˚ cuts.
3.Set the fence to the desired angle using the crosscut table angle gauge and lock the angle with the lock knob (see Figure 63).
4.Position the flip stop according to the length of the workpiece you want to cut off to the left of the blade.
5.Load the workpiece onto the table saw. The set up should look similar to Figure 64.
Figure 64. Example of miter cutting operation.
6.Once all the necessary safety precautions have been taken, perform the cutting opera- tion.
Angle Gauge
Lock Knob
Figure 63. Crosscut table angle gauge.
G0588/G0591 12" Sliding Table Saws |