Grizzly G0588, G0591 owner manual Operations, Operation Safety Operation Tips

SECTION 4: OPERATIONS

Operation Safety Operation Tips

Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving machinery.

NOTICE

If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.

Your safety is important. The tips below are intended to supplement SECTION 1: SAFETY. But remember, no safety list can be comprehen- sive of every situation. The operator is ultimately responsible for their own safety, as well as the safety of bystanders. Every cutting operation is uniquely different and may require safety equip- ment or safety procedures not mentioned in this manual.

Please follow these tips EVERY time you use your saw:

•Stand to the left of the blade line-of-cut when performing a cutting operation.

•Turn OFF the saw and allow the blade to come to a complete stop before removing the cut-off piece.

•Make sure that the riving knife is always aligned with the main blade before cutting!

•Always position the blade guard to the cor- rect height above the workpiece.

•Carefully plan each cutting operation to avoid injuries.

•When you release the sliding table lock, make sure that the knob is positioned so that it will not lock the table during a cut.

G0588/G0591 12" Sliding Table Saws -33-