Air Supply
Required Air PSI | 70 PSI |
Air Consumption | 4 CFM |
Maximum Air PSI | 90 PSI |
To connect the saw to compressed air:
1.Connect a source of compressed air to the air
Air |
Pressure |
Knob |
Air |
Pressure |
Dial |
Air Inlet Valve |
Figure 11. Air regulator-lubricator.
2.Lift up on the air pressure knob (see Figure 11), and turn it to adjust the air pressure dial to 70 PSI, then push the knob down to lock the setting.
3.Open the pneumatic access door on the right side of the machine and set the air pressure knob in a similar manner so that the air pres- sure dial reads 70 PSI (see Figure 12).
Air Pressure Knob
Air Pressure
Dial
Figure 12. Internal air regulator.
NOTICE
Exceeding 90 PSI may result in unpredict- able operation of the saw and damage to the pneumatic system.
G0641 Double Miter Saw |